John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit
- RS-stocknr.:
- 706-8586
- Fabrikantnummer:
- MTL10/PD
- Fabrikant:
- John Drummond
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
la pièce
218,58 €
(excl. BTW)
264,48 €
(incl. BTW)
- RS-stocknr.:
- 706-8586
- Fabrikantnummer:
- MTL10/PD
- Fabrikant:
- John Drummond
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | John Drummond | |
| Test Current Rating | 3.5mA | |
| Output Voltage | 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc | |
| Power Source | Mains | |
| Dimensions | 213 x 112 x 72mm | |
| Weight | 320g | |
| Height | 72mm | |
| Length | 213mm | |
| Maximum Operating Temperature | +55°C | |
| Minimum Operating Temperature | -10°C | |
| Width | 112mm | |
| Alles selecteren | ||
|---|---|---|
Merk John Drummond | ||
Test Current Rating 3.5mA | ||
Output Voltage 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc | ||
Power Source Mains | ||
Dimensions 213 x 112 x 72mm | ||
Weight 320g | ||
Height 72mm | ||
Length 213mm | ||
Maximum Operating Temperature +55°C | ||
Minimum Operating Temperature -10°C | ||
Width 112mm | ||
Vrijgesteld
- Land van herkomst:
- PH
Drummond MTL10 Test Lamp and Proving Unit Safety Kit
Voltage level indicator & proving unit safety kit comprising:
MTL10 Drummond Test Lamp
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
PD440 Proving Unit:
Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
Supplied with
Handy carry case, right angled probe tip, two straight tips and instructions
Mains Voltage Indicators - Contact
Gerelateerde Links
- John Drummond Voltage Indicator & Proving Unit Kit 3.5mA 700V ac, Kit Contents 1 Long Angled Prod, 1 L-Shaped Prod and
- John Drummond MTL20 Voltage Indicator & Proving Unit Kit 28mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit
- Martindale VIPDLOKPRO150-S Proving Unit Kit 3.5mA 690V LED
- Martindale VIPDLOKPRO138-S Proving Unit Kit 3.5mA 440V LED
- Martindale VIPDLOK138-S Proving Unit Kit 3.5mA 440V LED
- Martindale VT25PD-S Voltage Indicator Proving Unit 3.5mA 690V LED
- Martindale VIPD150-S Voltage Indicator Proving Unit 3.5mA 690V LED
- Martindale VIPD138-S Voltage Indicator Proving Unit 3.5mA 440V LED