John Drummond MTL15PD 3.5mA LCD

RS-stocknr.:: 180-9301
Fabrikantnummer:: MTL15PD
Fabrikant:: John Drummond

Subtotaal (1 eenheid)*

€ 479,19

(excl. BTW)

€ 579,82

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

6 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 479,19

*prijsindicatie

RS-stocknr.:: 180-9301
Fabrikantnummer:: MTL15PD
Fabrikant:: John Drummond

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	John Drummond
	Kit Contents	6 x 1.5 V AA Alkaline Batteries, 2 Straight Prods, Instructions, 2 Long Straight Prods, 1 L-Shaped Prod and Instructions to GS38, 1 Long Angled Prod
	Display Type	LCD
	Battery Type	AA
	Power Source	Battery
	Maximum Operating Temperature	40°C
	Standards/Approvals	No
	Height	50mm
	Width	143 mm
	Length	84mm
	Test Current	3.5mA
	Calibrated	RSCAL

	Alles selecteren
	Merk John Drummond
	Kit Contents 6 x 1.5 V AA Alkaline Batteries, 2 Straight Prods, Instructions, 2 Long Straight Prods, 1 L-Shaped Prod and Instructions to GS38, 1 Long Angled Prod
	Display Type LCD
	Battery Type AA
	Power Source Battery
	Maximum Operating Temperature 40°C
	Standards/Approvals No
	Height 50mm
	Width 143 mm
	Length 84mm
	Test Current 3.5mA
	Calibrated RSCAL

Datasheet

Vrijgesteld

Land van herkomst:: PH

John Drummond Voltage Indicator & Proving Unit Kit

The John Drummond test lamp and proving unit includes an MTL15 test lamp coupled with a PD690S proving unit and the TC69 combination carry case. Safe electrical work requires the use of a voltage indicator or test lamp that has been proved with a proving device before and after use. This TC69 soft carry case ensures that your proving device is always on hand and provides the simplest solution for implementing safe isolation practices for electrical test equipment. For convenience and to save time, the proving unit can be used without having to remove it from the case. The PD690S voltage and power output are matched to the MTL15 to illuminate all voltage bands and prove the test lamp is functioning correctly. The 1.5V alkaline batteries are required for the power supply to the proving unit.

Features and Benefits

• Four illumination bands up to 690V

• 1000V CAT IV safety rating

• Right angled and straight GS38 compliant probes

• High intensity long life LED indication

• 360° viewing angle

Applications

• Wind turbines installations

• Energy intensive process industries

• High power variable speed drives

• UPS systems

Certifications

• IP64 rated

• BS EN61010