MENNEKES, StarTOP IP44 Blue Cable Mount 4P Straight Industrial Power Connector Zone 22, 16A, 230V Phase Inverter

Bekijk deze categorie
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
RS-stocknr.:
530-6151
Fabrikantnummer:
951
Fabrikant:
MENNEKES
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

MENNEKES

Product Type

Industrial Power Connector

Current

16A

Pole Format

4P

Connector Gender

Male

Voltage

230V

Mount Type

Cable

Orientation

Straight

Termination Type

Screwless

Minimum Operating Temperature

-25°C

Series

StarTOP

IP Rating

IP44

Contact Gender

Male

Maximum Operating Temperature

55°C

Hazardous Area Certification

Zone 22

Standards/Approvals

No

Cable CSA

1, 2.5mm²

Colour

Blue

Phase Inverter

Yes

Low Voltage

No

Vrijgesteld

Land van herkomst:
DE

StarTOP Plugs and Connectors


Glanded entry completely screwless industrial plug and connector, used to reduce installation time by approximately 60%

Connection terminals strip conductors and provide contact as terminal is pushed home

Integral pressure cable gland automatically gives strain relief and a watertight cable seal to IP44

The black connectors are for use with 500V/60Hz supplies

The green connectors are for use with 500V/100-300Hz supplies

Mennekes ProTOP & StarTOP


Plugs and sockets conforming to the latest requirements of British and European standards. The insulator outer casing and interiors are manufactured from Amaplast (nylon 6) for excellent mechanical performance from -25°C to +55°C (ambient temperature). This material provides good electrical insulation and will meet the requirements of most industrial environments.,Contact tubes and pins are made of brass. To prevent incorrect connection, the earth contact is in a different position, relative to the safety key way on each socket outlet, for each voltage.,Products are type tested to VDE.

Note

230V plug and socket stock no.s 530-6151 and 530-6230 have four pins and are for use with 230V 3-phase supply applications. They are not compatible with the standard 2P+E 3-pin planform blue 230V connectors.

Caution

Users should ensure that if these 230V 3-phase connectors are used in conjunction with an inverter, then on no account should the output be disconnected from the inverter with the load still on-line.

Gerelateerde Links