Renesas Electronics Demonstration Board Half-Bridge Driver
- RS-stocknr.:
- 121-5903
- Fabrikantnummer:
- HIP2103-4DEMO2Z
- Fabrikant:
- Renesas Electronics
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 66,13
(excl. BTW)
€ 80,02
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 4 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 66,13 |
| 5 - 9 | € 64,43 |
| 10 + | € 62,82 |
*prijsindicatie
- RS-stocknr.:
- 121-5903
- Fabrikantnummer:
- HIP2103-4DEMO2Z
- Fabrikant:
- Renesas Electronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Renesas Electronics | |
| Product Type | Demo Board | |
| Power Management Function | Half-Bridge Driver | |
| Kit Classification | Development Board | |
| Kit Name | Demonstration Board | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Renesas Electronics | ||
Product Type Demo Board | ||
Power Management Function Half-Bridge Driver | ||
Kit Classification Development Board | ||
Kit Name Demonstration Board | ||
Standards/Approvals No | ||
HIP2103/HIP2104, 3-Phase, Half Bridge Motor Drivers, Intersil
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose motor drive module with a microprocessor controller on-board. It uses a PIC microcontroller to control the HIP2103 and the HIP2104 half bridge drivers with six MOSFETs.
The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 and the HIP2104 half bridge drivers which control six on-board MOSFETs configured as a 3-phase bridge. Two inputs per a phase are provided to control independently the high side driver and the low side driver.
The boards are designed for Full, or Half Bridge brushed DC motors and 3-phase brushless DC (BLDC) motor applications. It can be used in any application that requires any combination of three independent half bridges.
HIP2103-4DEMO1Z
MOSFET bridge supply voltage up to 60 V
3.3 V and 12 V LDO voltage regulators with dedicated enable pins (HIP2104)
Sleep mode quiescent current: 5 μA
Under Voltage-Lockout (UVLO): 4 V
3.3 V or 5 V CMOS compatible inputs with hysteresis
High current MOSFETs with integrated bootstrap diode
HIP2103-4DEMO2Z
MOSFET bridge supply voltage from 5 V to 40 V dc
High current MOSFETs on-board with integrated bootstrap diode
Large diameter holes for wire connections to motor and power source
12-pin through-hole header for signal connections to an external controller
Optional heatsink can be accommodated on the PCB back-side
Motor Controllers & Drivers, Intersil
Gerelateerde Links
- Renesas Electronics Half-Bridge Driver
- Renesas Electronics Evaluation Board Half-Bridge Driver for HIP2210
- Renesas Electronics Evaluation Board Half-Bridge Driver for HIP2211EVAL2Z-RS for HIP2211
- STMicroelectronics Automotive Octal Half-bridge Pre-driver Half-Bridge Driver for L99MH98 for N Channel MOSFETs
- MikroElektronika H-Bridge 2 Click Board Half-Bridge Driver
- Renesas Electronics 80V/2.5A Peak, High Frequency Full Bridge FET Driver Full Bridge FET Driver
- MikroElektronika H-Bridge Driver Click Half-Bridge Driver for MC33883 for mikroBUS socket
- Texas Instruments Half-Bridge Open Loop Evaluation Module Half-Bridge Driver for LMG1210 for LMG1210