LCBSBM-10-01A2-RT, 15.9mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- RS-stocknr.:
- 721-4710
- Fabrikantnummer:
- LCBSBM-10-01A2-RT
- Fabrikant:
- Essentra
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 40 eenheden)*
€ 13,92
(excl. BTW)
€ 16,84
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 40 stuk(s) klaar voor verzending
- 3.320 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 40 - 360 | € 0,348 | € 13,92 |
| 400 - 760 | € 0,334 | € 13,36 |
| 800 - 1960 | € 0,324 | € 12,96 |
| 2000 + | € 0,296 | € 11,84 |
*prijsindicatie
- RS-stocknr.:
- 721-4710
- Fabrikantnummer:
- LCBSBM-10-01A2-RT
- Fabrikant:
- Essentra
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Essentra | |
| PCB Support Type | Adhesive-Backed Support | |
| Overall Height | 24.6mm | |
| Body Height | 15.9mm | |
| Support Base Dimensions | 12.7 x 12.7mm | |
| PCB Hole Diameter | 3.18mm | |
| PCB Thickness | 1.57mm | |
| Material | Nylon | |
| Support Base Length | 12.7mm | |
| Support Base Width | 12.7mm | |
| Alles selecteren | ||
|---|---|---|
Merk Essentra | ||
PCB Support Type Adhesive-Backed Support | ||
Overall Height 24.6mm | ||
Body Height 15.9mm | ||
Support Base Dimensions 12.7 x 12.7mm | ||
PCB Hole Diameter 3.18mm | ||
PCB Thickness 1.57mm | ||
Material Nylon | ||
Support Base Length 12.7mm | ||
Support Base Width 12.7mm | ||
- Land van herkomst:
- GB
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
Gerelateerde Links
- LCBSBM-7-01A2-RT, 11.1mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- LCBSBM-9-01A2-RT, 14.3mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- LCBSBM-5-01A2-RT, 7.9mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- LCBSBM-10-01A-RT, 15.9mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- LCBSBM-08-01A-RT, 12.7mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- LCBSBM-05-01A-RT, 7.9mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- LCBSBM-06-01A-RT, 9.5mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- LCBSBM-04-01A-RT, 6.4mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base