Pico Technology TA058 Oscilloscope Probe, Active, Differential Type, 50MHz, 1:10
- RS-stocknr.:
- 898-6769
- Fabrikantnummer:
- TA058
- Fabrikant:
- Pico Technology
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 898-6769
- Fabrikantnummer:
- TA058
- Fabrikant:
- Pico Technology
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Pico Technology | |
| Probe Type | Active, Differential | |
| Attenuation | 1:10 | |
| Bandwidth | 50MHz | |
| Maximum Common Mode Input Voltage | 600V | |
| Model Number p | TA058 | |
| Number of Probes | 2 | |
| Safety Category | 600 V, CAT I ±700V | |
| Alles selecteren | ||
|---|---|---|
Merk Pico Technology | ||
Probe Type Active, Differential | ||
Attenuation 1:10 | ||
Bandwidth 50MHz | ||
Maximum Common Mode Input Voltage 600V | ||
Model Number p TA058 | ||
Number of Probes 2 | ||
Safety Category 600 V, CAT I ±700V | ||
- Land van herkomst:
- TW
Pico Technology Oscilloscope Probe
The Pico Technology TA058 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 50MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.
Features and Benefits
Bandwidth is DC to 50MHz (–3dB)
Attenuation ratio is 10:1
Accuracy is ±1%
Input impedance is 1.6Mohm ll7pF each side to ground
Differential range is ±70V (DC + peak AC) or 70VRMS
Maximum differential is ±700 V (DC + peak AC) or 600VRMS
Common mode range is ±700V (DC + peak AC) or 600VRMS
Absolute maximum voltage is ±700V (DC + peak AC) or 600VRMS CAT I
Swing is ±7V into 5Kohm load
Offset (typical) is <±2mV
Noise (typical) is 0.7mVRMS
Source impedance is 50ohm
CMRR (typical) is 95dB at 60Hz and 60dB at 1MHz
Ambient operating temperature ranges between -10°C and 40°C
Power requirement 4xAA cells or 6VDC/60mA mains adaptor or regulated 9VDC/40mA mains adaptor
Attenuation ratio is 10:1
Accuracy is ±1%
Input impedance is 1.6Mohm ll7pF each side to ground
Differential range is ±70V (DC + peak AC) or 70VRMS
Maximum differential is ±700 V (DC + peak AC) or 600VRMS
Common mode range is ±700V (DC + peak AC) or 600VRMS
Absolute maximum voltage is ±700V (DC + peak AC) or 600VRMS CAT I
Swing is ±7V into 5Kohm load
Offset (typical) is <±2mV
Noise (typical) is 0.7mVRMS
Source impedance is 50ohm
CMRR (typical) is 95dB at 60Hz and 60dB at 1MHz
Ambient operating temperature ranges between -10°C and 40°C
Power requirement 4xAA cells or 6VDC/60mA mains adaptor or regulated 9VDC/40mA mains adaptor
Applications
Safe measurement in power circuit
Acquisition of low speed balanced differential signals found in serial communications buses
Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
Signals in the milliV range from sensors and other instrumentation
Acquisition of low speed balanced differential signals found in serial communications buses
Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
Signals in the milliV range from sensors and other instrumentation
Certifications
IEC-1010.1
IEC-1010.2-031 CAT III
Pollution Degree 2
IEC-1010.2-031 CAT III
Pollution Degree 2
Gerelateerde Links
- Pico Technology Oscilloscope Battery, For Use With TA045 Active Differential Probes, TA058 Active Differential Probes
- Pico Technology Oscilloscope Probe, Active, Differential Type, 200MHz, 1:10
- Pico Technology TA057 Oscilloscope Probe, Active, Differential Type, 25MHz, 1:20, 1:200, BNC Connector
- Pico Technology TA Series TA044 Oscilloscope Probe, Differential Type, 70MHz, 1:100, 1:1000, BNC Connector
- Pico Technology TA Series TA041 Oscilloscope Probe, Differential Type, 25MHz, 1:10, 1:100, BNC Connector
- Pico Technology TA Series TA043 Oscilloscope Probe, Differential Type, 100MHz, 1:10, 1:100, BNC Connector
- Pico Technology PicoConnect Series 441 Oscilloscope Probe, Differential Type, 15MHz, 1:1, D9 Connector Connector
- Pico Technology PicoConnect Series 442 Oscilloscope Probe, Differential Type, 10MHz, 1:25, D9 Connector Connector
