Testec 8000 Series TT-SI 8010B Oscilloscope Probe, Differential Type, 100MHz, 1:100 / 1:1000dB, BNC Connector

Bekijk alle Oscilloscope Probes

Subtotaal (1 eenheid)*

€ 2.028,53

(excl. BTW)

€ 2.454,52

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 2 stuk(s) klaar voor verzending
  • Plus verzending 2 stuk(s) vanaf 18 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 2.028,53

*prijsindicatie

RS-stocknr.:
238-7389
Artikelnummer Distrelec:
302-52-705
Fabrikantnummer:
TT-SI 8010B
Fabrikant:
Testec
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Testec

Probe Type

Differential

Attenuation

1:100 / 1:1000dB

Bandwidth

100MHz

Maximum Common Mode Input Voltage

±7000 (DC+AC Peak)V

Connector Type

BNC

Model Number p

TT-SI 8010B

Number of Probes

1

Safety Category Level

CAT III

Safety Category Voltage

1000V

Series

8000

Safety Category

IEC61010-031:2015

Rise Time

5 ns, =3 ns

Land van herkomst:
CN

TT-SI 8010B
active differential probe


The Testec active differential probe TT-SI 8010B allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 100MHz / ±7000V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter. The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.

Bandwidth: 100MHz
Rise time: 3,5ns
Attenuation ratio: x100 / x1000
DC accuracy: ± 2%
Maximum input voltage:
Differential mode: ±700V (DC + AC Peak) @ x100
±7000V (DC + AC Peak) @ x1000
Common mode: ±7000V (DC + Peak AC)
Each side to ground: 1000Vrms CAT III / 2300Vrms
Safety standard: IEC61010-031: 2015

Scope of delivery:


1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual

Gerelateerde Links