Testec 8000 Series TT-SI 8051 Oscilloscope Probe, Differential Type, 100MHz, 1:50 / 1:500dB, BNC Connector

Bekijk alle Oscilloscope Probes

Subtotaal (1 eenheid)*

€ 1.119,64

(excl. BTW)

€ 1.354,76

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 4 stuk(s) vanaf 15 december 2025
  • Plus verzending 3 stuk(s) vanaf 12 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 1.119,64

*prijsindicatie

RS-stocknr.:
238-7385
Artikelnummer Distrelec:
302-52-707
Fabrikantnummer:
TT-SI 8051
Fabrikant:
Testec
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Testec

Probe Type

Differential

Attenuation

1:50 / 1:500dB

Bandwidth

100MHz

Maximum Common Mode Input Voltage

±1500 (DC+AC Peak)V

Connector Type

BNC

Model Number p

TT-SI 8051

Number of Probes

1

Safety Category Level

CAT III

Safety Category Voltage

600V

Series

8000

Safety Category

IEC61010-031:2015

Rise Time

5 ns, =3 ns

Land van herkomst:
CN

TT-SI 8051
active differential probe


The Testec active differential probe TT-SI 8051 allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 100MHz / ±1500V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.

Bandwidth: 100MHz
Rise time: 3,5ns
Attenuation ratio: x50 / x500
DC accuracy: ±2%
Maximum input voltage:
Differential mode: ±150V (DC + AC Peak) @ x50
±1500V (DC + AC Peak) @ x500
Common mode: ±1500V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015

Scope of delivery:


1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual

Gerelateerde Links