RS PRO Magnetic Field Detector 3mT 1000V ac

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 37,95

(excl. BTW)

€ 45,92

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 109 stuk(s) klaar voor verzending
  • 644 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 37,95

*prijsindicatie

RS-stocknr.:
375-5422
Fabrikant:
RS PRO
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

RS PRO

Indicator Type

Magnetic Field

Magnetic Sensitivity

3mT

Battery Type

AAA

Power Source

Battery

Safety Category

CAT III 1000 V

Weight

40g

Diameter

17mm

Length

152mm

Maximum Detection Voltage

1000V ac

Maximum Operating Temperature

+50°C

Safety Category Level

CAT III

Safety Category Voltage

1000V

Minimum Operating Temperature

-10°C

Vrijgesteld

Land van herkomst:
CN

Note

This unit uses a magnetic read switch sensor. For applications requiring more sensitivity we recommend stock No. 719-0876 which uses a Hall Effect sensor.

Supplied with

Batteries fitted and an instruction leaflet.
The Magnet Stick is an instrument for testing the presence of magnetic fields. By simply holding the tip of the instrument near the test area, it indicates a magnetic field by glowing. The test lamp responds to all kinds of magnetic fields, from alternating current to direct current and permanent magnets. (Sensitivity 30 gauss 3 mT)

General Features:

Powerful red light in the tip to indicate the presence of a magnetic field.

Easy to use.

Solenoid valves in pneumatic and hydraulic control equipment can easily be tested.

Test relays with coils and electrically controlled solenoid valves in all types of vehicles and machines.

Test solenoid valves when servicing oil burners.

A test magnet is located under the cap. By removing it and holding it in front of the tip, the function can be tested.

Some Examples Of Its Use

• Testing operating solenoid valves in pneumatic and hydraulic control equipment.

• Testing relays with coils and electrically controlled solenoid valves in all types of vehicles and machines.

• Testing solenoid valves when servicing oil burners.

The test lamp lights immediately and without metallic contact where there is a magnetic field, e.g. an activated coil in a solenoid valve. The test lamp responds to all types of magnetic fields - from alternating current and direct current to permanent magnets

Note

This unit uses a magnetic read switch sensor. For applications requiring more sensitivity we recommend stock No. 719-0876 which uses a Hall Effect sensor.

Supplied with

Batteries fitted and an instruction leaflet.

Gerelateerde Links