Martindale TEK 200 Magnetic Field Detector ±10mT, 100V ac to 600V ac

RS-stocknr.:: 719-0876
Fabrikantnummer:: TEK200
Fabrikant:: Martindale

Martindale TEK 200 Magnetic Field Detector ±10mT, 100V ac to 600V ac

Subtotaal (1 eenheid)*

€ 63,31

(excl. BTW)

€ 76,61

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

7 stuk(s) klaar voor verzending
44 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 63,31

*prijsindicatie

Kalibratie-opties

Martindale TEK 200 Magnetic Field Detector ±10mT, 100V ac to 600V ac With RS Calibration

Calibration Type:: RSCAL

RS-stocknr.: 716-1064

la pièce

121,31 €

(excl. BTW)

146,79 €

(incl. BTW)

RS-stocknr.:: 719-0876
Fabrikantnummer:: TEK200
Fabrikant:: Martindale

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Martindale
	Indicator Type	Magnetic Field, Voltage
	Magnetic Sensitivity	±10mT
	Battery Type	9V
	Audible Tone	Yes
	Power Source	Battery
	Safety Category	CAT III 1000 V, CAT IV 600 V
	Weight	150g
	Height	202mm
	Length	32mm
	Maximum Detection Voltage	600V ac
	Minimum Detection Voltage	100V ac
	Maximum Operating Temperature	+50°C
	Safety Category Level	CAT III, CAT IV
	Width	22mm
	Safety Category Voltage	600 V, 1000 V
	Model Number p	TEK 200
	Minimum Operating Temperature	0°C

	Alles selecteren
	Merk Martindale
	Indicator Type Magnetic Field, Voltage
	Magnetic Sensitivity ±10mT
	Battery Type 9V
	Audible Tone Yes
	Power Source Battery
	Safety Category CAT III 1000 V, CAT IV 600 V
	Weight 150g
	Height 202mm
	Length 32mm
	Maximum Detection Voltage 600V ac
	Minimum Detection Voltage 100V ac
	Maximum Operating Temperature +50°C
	Safety Category Level CAT III, CAT IV
	Width 22mm
	Safety Category Voltage 600 V, 1000 V
	Model Number p TEK 200
	Minimum Operating Temperature 0°C

N.v.t.

Martindale TEK200 Non-Contact Voltage and Magnetic Field Detector

A non-contact voltage detector with the additional ability to detect magnetic fields, the TEK200 has audible warning and a self-test feature. Sleek in design and designed to be durable the detector can operate in an altitude of up to 2000m.
Suitable for permanent magnets and for indication of the polarity of machine windings, it has a magnetic sensitivity of ±10 mT. Indicating the operation of solenoid valves in pneumatic and hydraulic control equipment, testing relays or solenoids in a wide range of controls it has a wide variety of applications.

Features and Benefits:

• Senses AC voltages from 100 - 600V
• Detects electrical field
• Eliminates need for separate proving unit
• Self-testing
• Displays polarity of magnetic fields
• Powered by PP3 battery (RS Stock No. 394-9059)

How do magnetic field sensors and detectors work?

Magnetic field sensors are able to detect changes such as direction, strength or flux in a magnetic field. Magnetic field detectors are able to detect fields, such as unipolar, bipolar and electro-magnetic. There are many types of technology used for this and they all have different approaches. Some record the resistance, some have coils surrounding magnetic material, another measures fields against an internal magnet based response that runs through a fluxing set of parameters. Some devices contain switches, when the state of the switch is changed for example from open to closed, a magnetic field has been detected. The most commonly known technologies are Fluxgate, Hall Effect, Magnetoresistive, magnetoinductive and SQUID. (Superconducting quantum interference devices)