Fluke 175 Digital Multimeter True RMS, UKAS Calibrated
- RS-stocknr.:
- 394-8826
- Artikelnummer Distrelec:
- 176-05-827
- Fabrikantnummer:
- FLUKE 175
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 461,00
(excl. BTW)
€ 557,81
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Beperkte voorraad
- Plus verzending 206 stuk(s) vanaf 24 augustus 2026
- Plus verzending 153 stuk(s) vanaf 27 augustus 2026
- Plus verzending 63 stuk(s) vanaf 24 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 461,00 |
*prijsindicatie
- RS-stocknr.:
- 394-8826
- Artikelnummer Distrelec:
- 176-05-827
- Fabrikantnummer:
- FLUKE 175
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Multimeter Type | Digital | |
| Product Type | Multimeter | |
| Resistance Resolution | 100mΩ | |
| Display Type | Digital | |
| Model Number | 175 | |
| Functions Measured | AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance | |
| Maximum DC Voltage Measurement | 1kV dc | |
| Maximum Resistance Measurement | 50mΩ | |
| True RMS | Yes | |
| AC Current Accuracy | ±1.5 % rdg + 3 Digits | |
| AC Voltage Accuracy | ±1 % rdg + 3 Digits | |
| DC Current Accuracy | ±1 % rdg + 3 Digits | |
| DC Voltage Accuracy | ±0.15 % rdg + 2 Digits | |
| DC Voltage Resolution | 0.1 mV dc | |
| AC Current Resolution | 10μA ac | |
| AC Voltage Resolution | 0.1mV ac | |
| DC Current Resolution | 0.01mA dc | |
| Maximum Frequency | 1kHz | |
| Minimum Operating Temperature | -10°C | |
| Resistance Measurement Accuracy | ±1.5 % rdg + 3 Digits | |
| Battery Life | 200h | |
| Maximum Operating Temperature | 50°C | |
| Weight | 420g | |
| Height | 43mm | |
| Length | 185mm | |
| Standards/Approvals | No | |
| Width | 90mm | |
| Safety Category Level | CAT III, CAT IV | |
| Calibrated | UKAS | |
| Battery Type | Alkaline | |
| Safety Category Voltage | 1000V | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Multimeter Type Digital | ||
Product Type Multimeter | ||
Resistance Resolution 100mΩ | ||
Display Type Digital | ||
Model Number 175 | ||
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance | ||
Maximum DC Voltage Measurement 1kV dc | ||
Maximum Resistance Measurement 50mΩ | ||
True RMS Yes | ||
AC Current Accuracy ±1.5 % rdg + 3 Digits | ||
AC Voltage Accuracy ±1 % rdg + 3 Digits | ||
DC Current Accuracy ±1 % rdg + 3 Digits | ||
DC Voltage Accuracy ±0.15 % rdg + 2 Digits | ||
DC Voltage Resolution 0.1 mV dc | ||
AC Current Resolution 10μA ac | ||
AC Voltage Resolution 0.1mV ac | ||
DC Current Resolution 0.01mA dc | ||
Maximum Frequency 1kHz | ||
Minimum Operating Temperature -10°C | ||
Resistance Measurement Accuracy ±1.5 % rdg + 3 Digits | ||
Battery Life 200h | ||
Maximum Operating Temperature 50°C | ||
Weight 420g | ||
Height 43mm | ||
Length 185mm | ||
Standards/Approvals No | ||
Width 90mm | ||
Safety Category Level CAT III, CAT IV | ||
Calibrated UKAS | ||
Battery Type Alkaline | ||
Safety Category Voltage 1000V | ||
Vrijgesteld
- Land van herkomst:
- CZ
Fluke Multimeter, True RMS Capability, 200h Battery Life - FLUKE 175
This handheld multimeter provides precise electrical measurement for field service and bench repair, combining True-RMS acquisition with a clear digital display and Basic diagnostic tools. It is designed for technicians in automation, electronics, electrical and mechanical roles who require accurate AC/DC readings, frequency and capacitance checks, and simple temperature measurements using a supplied bead thermocouple probe.
Features & Benefits
• True-RMS measurement gives accurate readings on non-sinusoidal signals
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use
**Applications**
• Suitable for commissioning and fault-finding on motor drives
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages
What probes and accessories are supplied for general use?
Standard test leads with 4mm lantern tips and protective cap arrive fitted, and a 9V battery is installed
temperature measurements use the included bead thermocouple probe.
How does the instrument behave with rapidly changing signals?
An analogue-style bargraph updates at a higher rate than the numeric display and a smoothing mode filters Rapid input fluctuations for easier interpretation.
How does it alert when encountering potentially hazardous voltages?
A built-in unsafe-voltage alert notifies the user if measured voltages exceed 30 V, and a test-lead alert warns of lead issues.
What recording and hold functions assist data capture during inspections?
The meter provides display hold, AutoHOLD and a Min–Max–Average recording mode with Min/Max alert to capture transient events.
How is battery and fuse maintenance performed on site?
The design allows battery and fuse replacement without removing the entire case, preserving uptime during routine maintenance.
Supplied with
Fluke 175 True-RMS Digital Multimeter
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide
Gerelateerde Links
- Fluke 175 Digital Digital Multimeter True RMS, RSCAL Calibrated
- Fluke 179 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 83 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 177 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 28 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 27 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 115 Digital Digital Multimeter True RMS, UKAS Calibrated
- Fluke 114 Digital Digital Multimeter True RMS, UKAS Calibrated