Fluke 114 Handheld Digital Multimeter True RMS - UKAS Calibrated

Bekijk alle Multimeters

Subtotaal (1 eenheid)*

€ 335,00

(excl. BTW)

€ 405,35

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 37 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 335,00

*prijsindicatie

RS-stocknr.:
625-0655
Fabrikantnummer:
2583552
Fabrikant:
Fluke
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Fluke

Product Type

Multimeter

Multimeter Type

Handheld

Display Type

Digital

Model Number

114

Resistance Resolution

100mΩ

Functions Measured

AC Voltage, Continuity, DC Voltage, Resistance

Maximum Resistance Measurement

40mΩ

Maximum DC Voltage Measurement

600V dc

True RMS

Yes

AC Voltage Accuracy

±1 % rdg + 3 Digits

DC Voltage Accuracy

±0.5 % rdg + 2 Digits

DC Voltage Resolution

0.1 mV dc

AC Voltage Resolution

0.1mV ac

Maximum Frequency

1kHz

Minimum Operating Temperature

-10°C

Resistance Measurement Accuracy

±1.5 % rdg + 2 Digits

Maximum Operating Temperature

50°C

Battery Life

400h

Weight

550g

Standards/Approvals

No

Height

167mm

Length

46mm

Safety Category Level

CAT III

Safety Category Voltage

600V

Calibrated

UKAS

N.v.t.

Land van herkomst:
CN

Fluke Multimeter, ±1 % rdg + 3 Digits AC Voltage Accuracy, ±0.5 % rdg + 2 Digits DC Voltage Accuracy - FLUKE-114 EUR


This handheld multimeter provides compact, field-ready measurement for electrical troubleshooting in industrial environments. It performs AC and DC voltage checks, resistance and continuity testing, and captures minimum, maximum and average values to monitor signal variation. The instrument includes low-impedance input to suppress ghost voltages and a backlit display for low-light locations.

Features & Benefits


• True RMS measurement for accurate AC readings up to 1 kHz
• DC accuracy ±0.5%rdg+2 digits for precise voltage checks
• Resistance range down to 40 mΩ to detect low-resistance faults
• Auto selection of AC/DC volts to speed diagnostics
• Min/Max/Average logging to capture transient fluctuations
• 9V alkaline battery delivering 400 h typical runtime

Applications


• Suitable for commissioning and fault finding on control panels
• Ideal for maintenance of motors and inverters with variable-frequency drives
• Used for insulation and bonding checks in installation verification
• Can be used for routine site verification of distribution boards
• Used with portable test setups needing ghost-voltage suppression

What display and update behaviour can I expect during measurements?


The meter uses a 6,000-count digital readout with a 33-segment bar graph

numeric updates occur four times per second and the bar graph updates 32 times per second.

How does the device protect against high-energy transients?


It has surge protection rated to withstand 6 kV Peak per the applicable IEC safety parameters for CAT III, 600V environments.

What environmental limits apply for safe operation and storage?


Operating temperature range is -10°C to +50°C and storage range is -40°C to +60°C with specified accuracy maintained between 18°C and 28°C.

What accessories are supplied to start working immediately?


The kit includes insulated test leads, a protective holster and a pre-installed 9V alkaline battery.

Note

For Calibrated Articles - Please note that accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.

Gerelateerde Links