STMicroelectronics, Stepper Motor Driver IC, 52 V 2.8 A 36-Pin, PowerSO
- RS-stocknr.:
- 233-2998
- Fabrikantnummer:
- L6208PD013TR
- Fabrikant:
- STMicroelectronics
Subtotaal (1 rol van 600 eenheden)*
€ 3.787,20
(excl. BTW)
€ 4.582,80
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 600 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 600 + | € 6,312 | € 3.787,20 |
*prijsindicatie
- RS-stocknr.:
- 233-2998
- Fabrikantnummer:
- L6208PD013TR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Motor Type | Stepper | |
| Product Type | Motor Driver IC | |
| Configuration | 2 Phase | |
| Maximum IGBT Collector Current | 2.8A | |
| Maximum Collector Emitter Voltage Vceo | 52V | |
| Mount Type | Surface | |
| Package Type | PowerSO | |
| Pin Count | 36 | |
| Output Current | 5.6A | |
| Maximum Supply Voltage | 52V | |
| Minimum Supply Voltage | 8V | |
| Typical Switching Frequency | 100kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Length | 16mm | |
| Series | L6208 | |
| Height | 3.6mm | |
| Automotive Standard | No | |
| Supply Current | 2.8A | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Motor Type Stepper | ||
Product Type Motor Driver IC | ||
Configuration 2 Phase | ||
Maximum IGBT Collector Current 2.8A | ||
Maximum Collector Emitter Voltage Vceo 52V | ||
Mount Type Surface | ||
Package Type PowerSO | ||
Pin Count 36 | ||
Output Current 5.6A | ||
Maximum Supply Voltage 52V | ||
Minimum Supply Voltage 8V | ||
Typical Switching Frequency 100kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Length 16mm | ||
Series L6208 | ||
Height 3.6mm | ||
Automotive Standard No | ||
Supply Current 2.8A | ||
The STMicroelectronics L6208 device is a DMOS fully integrated stepper motor driver with non-dissipative overcurrent protection, realized in BCD technology, which combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. The device includes all the circuitry needed to drive a two phase bipolar stepper motor including: a dual DMOS full bridge, the constant off time PWM current controller that performs the chopping regulation and the phase sequence generator, that generates the stepping sequence. Available in PowerSO36 and SO24 (20 + 2 + 2) packages, the L6208 device features a non-dissipative overcurrent protection on the high-side power MOSFETs and thermal shutdown.
Operating supply voltage from 8 to 52 V
5.6 A output peak current (2.8 A RMS)
RDS(ON) 0.3 Ω typ. value at Tj = 25 °C
Operating frequency up to 100 KHz
Non-dissipative overcurrent protection
Dual independent constant off PWM current controllers
Fast/slow decay mode selection
Fast decay quasi-synchronous rectification
Decoding logic for stepper motor full and half step drive
Cross conduction protection
Thermal shutdown
Under voltage lockout
Integrated fast freewheeling diodes
Gerelateerde Links
- STMicroelectronics L6208PD013TR, Stepper Motor Driver IC, 52 V 2.8 A 36-Pin, PowerSO
- STMicroelectronics, Stepper Motor Driver IC, 52 V 2.8 A 38-Pin, PowerSO
- STMicroelectronics L6208PD, Stepper Motor Driver IC, 52 V 2.8 A 38-Pin, PowerSO
- STMicroelectronics L6472PDTR, Stepper Motor Driver IC 36-Pin, PowerSO-36
- STMicroelectronics, Brushed DC Motor Motor Driver IC, 52 V 2.8 A 36-Pin, PowerSO
- STMicroelectronics, Brushless DC Motor Motor Driver IC, 52 V 2.8 A 36-Pin, PowerSO
- STMicroelectronics, Stepper Motor Driver IC 36-Pin, PowerSO
- STMicroelectronics L6207PD, Brushed DC Motor Motor Driver IC, 52 V 2.8 A 36-Pin, PowerSO