STMicroelectronics L6472PDTR, Stepper Motor Driver IC 36-Pin, PowerSO-36
- RS-stocknr.:
- 330-271
- Fabrikantnummer:
- L6472PDTR
- Fabrikant:
- STMicroelectronics
Subtotaal (1 eenheid)*
€ 7,88
(excl. BTW)
€ 9,53
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 03 mei 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 7,88 |
*prijsindicatie
- RS-stocknr.:
- 330-271
- Fabrikantnummer:
- L6472PDTR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Motor Driver IC | |
| Motor Type | Stepper | |
| Mount Type | Surface | |
| Package Type | PowerSO-36 | |
| Pin Count | 36 | |
| Output Current | 7A | |
| Maximum Supply Voltage | 45V | |
| Minimum Supply Voltage | 8V | |
| Typical Switching Frequency | 15.6kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | RoHS | |
| Series | L6472 | |
| Supply Current | 3.7mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Motor Driver IC | ||
Motor Type Stepper | ||
Mount Type Surface | ||
Package Type PowerSO-36 | ||
Pin Count 36 | ||
Output Current 7A | ||
Maximum Supply Voltage 45V | ||
Minimum Supply Voltage 8V | ||
Typical Switching Frequency 15.6kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals RoHS | ||
Series L6472 | ||
Supply Current 3.7mA | ||
Automotive Standard No | ||
- Land van herkomst:
- MY
The STMicroelectronics fully integrated micro stepping motor driver with motion engine and SPI are analog mixed signal technology, is an advanced fully integrated solution suitable for driving two-phase bipolar stepper motors with micro stepping. It integrates a dual low RDS(on)DMOS full bridge with all of the power switches equipped with an accurate on-chip current sensing circuitry suitable for non dissipative current control and overcurrent protection. Thanks to a new current control, a 1/16 micro stepping is achieved through an adaptive decay mode which outperforms traditional implementations. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or target position, easily programmed through a dedicated register set.
Programmable speed profile
Programmable power MOSFET slew rate
Up to 1 or 16 micro stepping
Predictive current control with adaptive decay
Non dissipative current sensing
SPI interface
Low quiescent and standby currents
Gerelateerde Links
- STMicroelectronics L6470PD, Stepper Motor Driver IC 36-Pin, PowerSO
- STMicroelectronics L6474PD, Stepper Motor Driver IC, 45 V 3 A 36-Pin, PowerSO
- STMicroelectronics L6472PD, Stepper Motor Driver IC, 45 V 3 A 36-Pin, PowerSO
- STMicroelectronics L6208PD013TR, Stepper Motor Driver IC, 52 V 2.8 A 36-Pin, PowerSO
- STMicroelectronics, Stepper Motor Driver IC, 40 V 1.5 A 36-Pin, PowerSO
- STMicroelectronics, Stepper Motor Driver IC, 40 V 1.2 A 36-Pin, PowerSO
- STMicroelectronics E-L6258EXTR, Stepper Motor Driver IC, 40 V 1.5 A 36-Pin, PowerSO
- STMicroelectronics E-L6258E, Stepper Motor Driver IC, 40 V 1.2 A 36-Pin, PowerSO
