McLennan Servo Supplies Stepper Motor Controller, 85 V dc, 2 Phase, 6 A
- RS-stocknr.:
- 441-0287
- Fabrikantnummer:
- PM546
- Fabrikant:
- McLennan Servo Supplies
Subtotaal (1 eenheid)*
€ 796,81
(excl. BTW)
€ 964,14
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 20 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 796,81 |
*prijsindicatie
- RS-stocknr.:
- 441-0287
- Fabrikantnummer:
- PM546
- Fabrikant:
- McLennan Servo Supplies
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | McLennan Servo Supplies | |
| Number of Phases | 2 | |
| Product Type | Stepper Motor Controller | |
| Supply Voltage | 85 V dc | |
| Current Rating | 6 A | |
| Overall Length | 228mm | |
| Overall Width | 100mm | |
| Overall Depth | 34 mm | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 30°C | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk McLennan Servo Supplies | ||
Number of Phases 2 | ||
Product Type Stepper Motor Controller | ||
Supply Voltage 85 V dc | ||
Current Rating 6 A | ||
Overall Length 228mm | ||
Overall Width 100mm | ||
Overall Depth 34 mm | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 30°C | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- GB
Bipolar Stepper Drive
Drives motors up to 85V and 6A/phase
On board output drive current setting (2.5 to 6.0A)
High efficiency chopped constant current power stage provides increased performance and reduced current consumption
Single supply rail simplifies power supply requirements
Short-circuit and open circuit protected stage for increased reliability
Selectable full or half step phase logic
Over temperature monitor with selectable automatic drive shutdown
Opto-isolated control inputs
Control from external clock and direction signals
Gerelateerde Links
- McLennan Servo Supplies Stepper Motor Controller, 36 V, 3 Phase, 3.5 A
- McLennan Servo Supplies Bipolar Hybrid Stepper Motor 1.8°, 0.29Nm, 2.3 A, 4 Wires
- McLennan Servo Supplies Cable Cable for Use with Stepper Drives
- McLennan Servo Supplies Permanent Magnet Stepper Motor 12 V, 9 mNm Torque, 7.5 °, 2 mm Shaft
- McLennan Servo Supplies Permanent Magnet Stepper Motor 5 V, 3.9 mNm Torque, 18 °, 1.5 mm Shaft
- McLennan Servo Supplies M82201 Series Permanent Magnet Stepper Motor 12 V, 25 mNm Torque, 7.5 °, 2 mm Shaft
- McLennan Servo Supplies 42M Series Permanent Magnet Stepper Motor 5 V, 66 mNm Torque, 7.5 °, 3 mm Shaft
- McLennan Servo Supplies Junction Box Junction Box for Use with Stepper Drives