McLennan Servo Supplies Stepper Motor Controller, 3.5 A
- RS-stocknr.:
- 441-0265
- Fabrikantnummer:
- MSE570 EVO 2
- Fabrikant:
- McLennan Servo Supplies
Subtotaal (1 eenheid)*
€ 263,44
(excl. BTW)
€ 318,76
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 10 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 263,44 |
*prijsindicatie
- RS-stocknr.:
- 441-0265
- Fabrikantnummer:
- MSE570 EVO 2
- Fabrikant:
- McLennan Servo Supplies
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | McLennan Servo Supplies | |
| Current Rating | 3.5 A | |
| Overall Length | 160mm | |
| Overall Width | 100mm | |
| Overall Depth | 35.5mm | |
| Alles selecteren | ||
|---|---|---|
Merk McLennan Servo Supplies | ||
Current Rating 3.5 A | ||
Overall Length 160mm | ||
Overall Width 100mm | ||
Overall Depth 35.5mm | ||
Vrijgesteld
- Land van herkomst:
- GB
Slimline Bipolar Stepper Motor Drive
Drives motors up to 40V at 3.5A
Adjustable drive current settings from 0.5 to 3.5A
Output overload protection
Synchronisation output for multi-axis systems
Full and half step drive modes
TTL & CMOS compatible control interface
Output disable input
5 & 12Vdc auxiliary outputs for external device energisation
Status LED's for condition monitoring
Provision for assembling on-board oscillator with ramp, low and high speed ranges
Single rail power supply for both motor drive and logic supplies
Adjustable drive current settings from 0.5 to 3.5A
Output overload protection
Synchronisation output for multi-axis systems
Full and half step drive modes
TTL & CMOS compatible control interface
Output disable input
5 & 12Vdc auxiliary outputs for external device energisation
Status LED's for condition monitoring
Provision for assembling on-board oscillator with ramp, low and high speed ranges
Single rail power supply for both motor drive and logic supplies
Note
Gerelateerde Links
- McLennan Servo Supplies Stepper Motor Controller, 6 A
- McLennan Servo Supplies Permanent Magnet Stepper Motor, 9.0mNm Torque, 12 V, 7.5°, 2mm Shaft
- McLennan Servo Supplies Permanent Magnet Stepper Motor, 66mNm Torque, 5 V, 7.5°, 3mm Shaft
- McLennan Servo Supplies Permanent Magnet Stepper Motor, 25mNm Torque, 12 V, 7.5°, 2mm Shaft
- McLennan Servo Supplies Permanent Magnet Stepper Motor, 9.0mNm Torque, 5 V, 7.5°, 2mm Shaft
- McLennan Servo Supplies Permanent Magnet Stepper Motor, 3.9mNm Torque, 5 V, 18°, 1.5mm Shaft
- McLennan Servo Supplies Bipolar Hybrid Stepper Motor 1.8°, 0.29Nm, 2.3 A, 4 Wires
- McLennan Servo Supplies Permanent Magnet Stepper Motor, 1.0Nm Torque, 5 V, 7.5°, 4mm Shaft
