Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V, I2C, SSOP-14, 5-Pin

Bekijk alle Motion Sensor ICs
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 2 eenheden)*

€ 2,77

(excl. BTW)

€ 3,352

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 1.790 stuk(s) vanaf 15 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
2 - 8€ 1,385€ 2,77
10 - 98€ 1,19€ 2,38
100 - 248€ 0,94€ 1,88
250 - 498€ 0,865€ 1,73
500 +€ 0,79€ 1,58

*prijsindicatie

Packaging Options:
RS-stocknr.:
258-4175
Fabrikantnummer:
TLI493DW2BWA0XTSA1
Fabrikant:
Infineon
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Infineon

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect

Number of Axis

3

Mount Type

Surface

Interface Type

I2C

Maximum Frequency Response

1000kHz

Minimum Frequency Response

400kHz

Minimum Supply Voltage

2.8V

Maximum Supply Voltage

3.5V

Package Type

SSOP-14

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Pin Count

5

Standards/Approvals

IPC/JEDEC J-STD-020, RoHS

Height

0.59mm

Length

1.13mm

Width

0.93 mm

Supply Current

7nA

Automotive Standard

No

The Infineon XENSIV is the device for industrial and consumer applications, the low power 3D hall sensor with I2C interface. It uses our latest 3D Hall generation and is housed in an extremely small wafer-level package. With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor paves the way for new design options. Due to the small WLB-5 package and the low current consumption of 7 nA in power-down mode, the magnetic sensor is also suitable for use in applications that previously used resistor-based or optical solutions.

Power down mode with 7 nA (typ.) power consumption

Variable update frequencies and power modes

Triggering by external microcontroller possible via I2C protocol

X-Y angular measurement mode

Interrupt signal to indicate a valid measurement to the microcontroller

Pb-free (RoHS compliant) and halogen free package

Gerelateerde Links