Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V, I2C, SSOP-14, 5-Pin
- RS-stocknr.:
- 258-4174
- Fabrikantnummer:
- TLI493DW2BWA0XTSA1
- Fabrikant:
- Infineon
Bulkkorting beschikbaar
Subtotaal (1 rol van 4000 eenheden)*
€ 2.224,00
(excl. BTW)
€ 2.692,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 4000 - 4000 | € 0,556 | € 2.224,00 |
| 8000 - 8000 | € 0,50 | € 2.000,00 |
| 12000 + | € 0,45 | € 1.800,00 |
*prijsindicatie
- RS-stocknr.:
- 258-4174
- Fabrikantnummer:
- TLI493DW2BWA0XTSA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Sensor Type | Hall Effect | |
| Product Type | Hall Effect Sensor | |
| Number of Axis | 3 | |
| Mount Type | Surface | |
| Interface Type | I2C | |
| Maximum Frequency Response | 1000kHz | |
| Minimum Frequency Response | 400kHz | |
| Minimum Supply Voltage | 2.8V | |
| Package Type | SSOP-14 | |
| Maximum Supply Voltage | 3.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 5 | |
| Standards/Approvals | IPC/JEDEC J-STD-020, RoHS | |
| Width | 0.93 mm | |
| Length | 1.13mm | |
| Height | 0.59mm | |
| Supply Current | 7nA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Sensor Type Hall Effect | ||
Product Type Hall Effect Sensor | ||
Number of Axis 3 | ||
Mount Type Surface | ||
Interface Type I2C | ||
Maximum Frequency Response 1000kHz | ||
Minimum Frequency Response 400kHz | ||
Minimum Supply Voltage 2.8V | ||
Package Type SSOP-14 | ||
Maximum Supply Voltage 3.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 5 | ||
Standards/Approvals IPC/JEDEC J-STD-020, RoHS | ||
Width 0.93 mm | ||
Length 1.13mm | ||
Height 0.59mm | ||
Supply Current 7nA | ||
Automotive Standard No | ||
The Infineon XENSIV is the device for industrial and consumer applications, the low power 3D hall sensor with I2C interface. It uses our latest 3D Hall generation and is housed in an extremely small wafer-level package. With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor paves the way for new design options. Due to the small WLB-5 package and the low current consumption of 7 nA in power-down mode, the magnetic sensor is also suitable for use in applications that previously used resistor-based or optical solutions.
Power down mode with 7 nA (typ.) power consumption
Variable update frequencies and power modes
Triggering by external microcontroller possible via I2C protocol
X-Y angular measurement mode
Interrupt signal to indicate a valid measurement to the microcontroller
Pb-free (RoHS compliant) and halogen free package
Gerelateerde Links
- Infineon SMD Hall Effect Sensor
- Infineon SMD Hall Effect Sensor Latch
- Infineon SMD Hall Effect Sensor Switch
- Infineon SMD Hall Effect Sensor Latch, PG-SSO-3, 3-Pin
- Infineon Surface Mount Hall Effect Sensor Latch
- Infineon Surface Mount Hall Effect Sensor Switch
- Infineon SMD/SMT Hall Effect Sensor, Analogue Output, 4.5-5.5 V
- Infineon Hall Effect Sensor, 20 V