Infineon Surface Hall Effect Sensor -0.3 V 3.5V, I2C, TSOP-6, 6-Pin

RS-stocknr.:: 218-6373
Fabrikantnummer:: TLI493DA2B6HTSA1
Fabrikant:: Infineon

Infineon Surface Hall Effect Sensor -0.3 V 3.5V, I2C, TSOP-6, 6-Pin

Subtotaal (1 verpakking van 10 eenheden)*

€ 6,35

(excl. BTW)

€ 7,68

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

2.540 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
10 +	€ 0,635	€ 6,35

*prijsindicatie

RS-stocknr.:: 218-6373
Fabrikantnummer:: TLI493DA2B6HTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Sensor Type	Hall Effect
	Product Type	Hall Effect Sensor
	Technology	Digital
	Mount Type	Surface
	Interface Type	I2C
	Minimum Supply Voltage	-0.3V
	Package Type	TSOP-6
	Maximum Supply Voltage	3.5V
	Minimum Operating Temperature	-40°C
	Pin Count	6
	Maximum Operating Temperature	125°C
	Standards/Approvals	RoHS
	Height	1.1mm
	Series	TLI493D-A2B6
	Width	1.6mm
	Length	2.9mm
	Automotive Standard	No
	Supply Current	3.4mA

	Alles selecteren
	Merk Infineon
	Sensor Type Hall Effect
	Product Type Hall Effect Sensor
	Technology Digital
	Mount Type Surface
	Interface Type I2C
	Minimum Supply Voltage -0.3V
	Package Type TSOP-6
	Maximum Supply Voltage 3.5V
	Minimum Operating Temperature -40°C
	Pin Count 6
	Maximum Operating Temperature 125°C
	Standards/Approvals RoHS
	Height 1.1mm
	Series TLI493D-A2B6
	Width 1.6mm
	Length 2.9mm
	Automotive Standard No
	Supply Current 3.4mA

Datasheet - TLI493DA2B6HTSA1

Infineon TLI493D-A2B6 Series Hall Effect Sensor, 3.5V Maximum Supply Voltage, 3.4mA Supply Current - TLI493DA2B6HTSA1

This Hall effect sensor provides a Compact digital magnetic sensing solution for electronic assemblies, communicating via an I2C Interface and designed for surface mounting in small‑footprint applications. It operates across a wide ambient temperature range and is intended for low‑power measurement tasks on densely populated PCBs.

Features and Benefits:

• Low supply current reduces power draw during continuous operation
• Operates from supply voltages up to 3.5 V enabling low‑voltage systems
• Six‑pin TSOP‑6 package simplifies PCB placement and soldering
• Wide temperature tolerance supports high‑temperature working conditions
• Digital Interface allows direct integration with microcontrollers

Applications

• Suitable for magnet position sensing in Compact electronics
• Ideal for battery‑powered devices requiring low‑power sensing
• Used with microcontrollers for magnetic field measurement tasks
• Can be used for PCB‑mounted proximity detection systems

What pin count should I allow on the PCB footprint?

The device requires a six‑pin footprint to match its TSOP‑6 package.

What is the expected current draw in normal operation?

The typical supply current is 3.4 mA during Active operation.

What supply voltage range must the power rail support?

The maximum allowable supply voltage is 3.5 V and the input lower limit reaches below ground to −0.3 V.

How tolerant is the device to environmental temperature extremes?

It is rated to function across a minimum of −40 °C up to a maximum of 125 °C.

What Interface protocol is available for system communication?

Communication is provided via an I2C digital interface.