Melexis Surface Hall Effect Sensor 1.6 V 3.6 V, UTQFN, 6-Pin
- RS-stocknr.:
- 194-2954
- Fabrikantnummer:
- MLX92213ELD-AAA-000-RE
- Fabrikant:
- Melexis
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 25 eenheden)*
€ 8,80
(excl. BTW)
€ 10,65
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 29 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 25 - 25 | € 0,352 | € 8,80 |
| 50 - 475 | € 0,304 | € 7,60 |
| 500 - 975 | € 0,297 | € 7,43 |
| 1000 - 2475 | € 0,29 | € 7,25 |
| 2500 + | € 0,282 | € 7,05 |
*prijsindicatie
- RS-stocknr.:
- 194-2954
- Fabrikantnummer:
- MLX92213ELD-AAA-000-RE
- Fabrikant:
- Melexis
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Melexis | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Latch | |
| Minimum Supply Voltage | 1.6V | |
| Package Type | UTQFN | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 6 | |
| Length | 1.5mm | |
| Height | 0.35mm | |
| Series | MLX92213 | |
| Width | 2 mm | |
| Standards/Approvals | Pb Free | |
| Response Time | 1.90ms | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Melexis | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Latch | ||
Minimum Supply Voltage 1.6V | ||
Package Type UTQFN | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 6 | ||
Length 1.5mm | ||
Height 0.35mm | ||
Series MLX92213 | ||
Width 2 mm | ||
Standards/Approvals Pb Free | ||
Response Time 1.90ms | ||
Automotive Standard No | ||
The MLX92213 features an ultra-sensitive Hall-effect latch operating from 1.6 V to 3.6 V. The output is a Push-Pull type so that an external pull-up resistor is not needed for proper operation, hence reducing PCB component count.
his device is primarily targeting battery-operated applications. As the famous Hall-effect omnipolar switch MLX90248, the MLX92213 employs an awake/sleep strategy to reduce its power consumption versus a standard Hall-effect latch sensor.
The magnetic flux density is periodically evaluated against predefined thresholds. If the flux density is above/below the BOP/BRP thresholds, then the output changes its state accordingly. During the sleep mode the output is latched in its previous state. The design has been optimized for applications requiring extended operating lifetime in battery-powered systems.
Gerelateerde Links
- Melexis Surface Mount Hall Effect Sensor, UTQFN, 6-Pin
- Melexis Surface Mount Hall Effect Sensor, TSOT, 23-Pin
- Melexis Surface Mount Hall Effect Sensor, TSOT, 3-Pin
- Melexis Through Hole Hall Effect Sensor, TO92, 3-Pin
- Melexis 3-Axis Surface Mount Hall Effect Sensor, I2C, SPI
- Melexis Through Hole Hall Effect Sensor
- Melexis Surface Mount Position Sensor, SOIC, 8-Pin
- Melexis 3-Axis Surface Mount Position Sensor, Digital PWM