Melexis Through Hole Hall Effect Latch 3.5 V 24 V, TO-92, 3-Pin
- RS-stocknr.:
- 194-2960
- Fabrikantnummer:
- US1881LUA-AAA-000-BU
- Fabrikant:
- Melexis
Subtotaal (1 zak van 1000 eenheden)*
€ 359,00
(excl. BTW)
€ 434,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 17.000 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per Zak* |
|---|---|---|
| 1000 + | € 0,359 | € 359,00 |
*prijsindicatie
- RS-stocknr.:
- 194-2960
- Fabrikantnummer:
- US1881LUA-AAA-000-BU
- Fabrikant:
- Melexis
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Melexis | |
| Product Type | Hall Effect Latch | |
| Sensor Type | Hall Effect Sensors | |
| Technology | CMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Latch | |
| Maximum Frequency Response | 10kHz | |
| Minimum Supply Voltage | 3.5V | |
| Maximum Supply Voltage | 24V | |
| Package Type | TO-92 | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Height | 3.2mm | |
| Series | US1881 | |
| Standards/Approvals | RoHS | |
| Length | 4.3mm | |
| Width | 1.6 mm | |
| Supply Current | 5mA | |
| Automotive Standard | No | |
| Response Time | 0.25μs | |
| Alles selecteren | ||
|---|---|---|
Merk Melexis | ||
Product Type Hall Effect Latch | ||
Sensor Type Hall Effect Sensors | ||
Technology CMOS | ||
Mount Type Through Hole | ||
Magnetic Type Latch | ||
Maximum Frequency Response 10kHz | ||
Minimum Supply Voltage 3.5V | ||
Maximum Supply Voltage 24V | ||
Package Type TO-92 | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Height 3.2mm | ||
Series US1881 | ||
Standards/Approvals RoHS | ||
Length 4.3mm | ||
Width 1.6 mm | ||
Supply Current 5mA | ||
Automotive Standard No | ||
Response Time 0.25μs | ||
The US1881 is a Hall-effect latch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in automotive, industrial and consumer applications.
The US1881 has been proved its use into the industry by its widely usage in different markets.
The device is delivered in a TSOT for surface mount process and in a Plastic Single In Line (TO-92 flat) for through-hole mount.
Wide operating voltage range from 3.5 V to 24 V
High magnetic sensitivity – Multi-purpose
CMOS technology
Chopper-stabilized amplifier stage
Low current consumption
Open drain output
Thin SOT23 3L and flat TO-92 3L both packages
SE package North Pole active
UA package South Pole active
Gerelateerde Links
- Melexis Through Hole Hall Effect Sensor, TO92, 3-Pin
- Melexis Through Hole Hall Effect Sensor
- Melexis Surface Mount Hall Effect Sensor, TSOT, 23-Pin
- Melexis Surface Mount Hall Effect Sensor, TSOT, 3-Pin
- Melexis Surface Mount Hall Effect Sensor, UTQFN, 6-Pin
- Melexis 3-Axis Surface Mount Hall Effect Sensor, I2C, SPI
- Infineon SMD Hall Effect Sensor
- Hall Effect Sensors
