Infineon SIPMOS Type P-Channel MOSFET, 150 mA, 60 V Enhancement, 3-Pin SC-70
- RS-stocknr.:
- 826-9945
- Fabrikantnummer:
- BSS84PWH6327XTSA1
- Fabrikant:
- Infineon
Subtotaal (1 rol van 500 eenheden)*
€ 35,50
(excl. BTW)
€ 43,00
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Tijdelijk niet op voorraad
- Verzending 7.500 stuk(s) vanaf 10 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 500 + | € 0,071 | € 35,50 |
*prijsindicatie
- RS-stocknr.:
- 826-9945
- Fabrikantnummer:
- BSS84PWH6327XTSA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Channel Type | Type P | |
| Product Type | MOSFET | |
| Maximum Continuous Drain Current Id | 150mA | |
| Maximum Drain Source Voltage Vds | 60V | |
| Package Type | SC-70 | |
| Series | SIPMOS | |
| Mount Type | Surface | |
| Pin Count | 3 | |
| Maximum Drain Source Resistance Rds | 25Ω | |
| Channel Mode | Enhancement | |
| Forward Voltage Vf | -1.12V | |
| Maximum Power Dissipation Pd | 300mW | |
| Typical Gate Charge Qg @ Vgs | 1nC | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Length | 2mm | |
| Height | 0.8mm | |
| Automotive Standard | AEC-Q101 | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Channel Type Type P | ||
Product Type MOSFET | ||
Maximum Continuous Drain Current Id 150mA | ||
Maximum Drain Source Voltage Vds 60V | ||
Package Type SC-70 | ||
Series SIPMOS | ||
Mount Type Surface | ||
Pin Count 3 | ||
Maximum Drain Source Resistance Rds 25Ω | ||
Channel Mode Enhancement | ||
Forward Voltage Vf -1.12V | ||
Maximum Power Dissipation Pd 300mW | ||
Typical Gate Charge Qg @ Vgs 1nC | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Length 2mm | ||
Height 0.8mm | ||
Automotive Standard AEC-Q101 | ||
Infineon SIPMOS Series MOSFET, 60V Maximum Drain Source Voltage, 150mA Maximum Continuous Drain Current - BSS84PWH6327XTSA1
This MOSFET is a P‑channel enhancement device designed for compact surface‑mount applications in automotive and industrial contexts. It controls and switches small currents at moderate voltages while operating across a wide temperature range suitable for demanding environments.
Features and Benefits:
• 60V drain rating enables moderate‑voltage switching capacity
• 150mA continuous drain current supports low‑power circuits
• 25Ω maximum Rds reduces losses in light‑load switching
• 300mW power dissipation allows sustained thermal handling
• 20V gate tolerance permits flexible gate‑drive levels
• 1nC typical gate charge yields fast, low‑energy switching
• 150mA continuous drain current supports low‑power circuits
• 25Ω maximum Rds reduces losses in light‑load switching
• 300mW power dissipation allows sustained thermal handling
• 20V gate tolerance permits flexible gate‑drive levels
• 1nC typical gate charge yields fast, low‑energy switching
Applications
• Suitable for load switching in automotive control modules
• Ideal for level‑shifting in sensor interface circuits
• Used with battery management for low‑current paths
• Can be used for protection switching in telematics units
• Appropriate for compact consumer electronics power paths
• Ideal for level‑shifting in sensor interface circuits
• Used with battery management for low‑current paths
• Can be used for protection switching in telematics units
• Appropriate for compact consumer electronics power paths
What environmental range can it tolerate in deployed systems?
It operates from -55°C up to 150°C, covering extended cold‑start and high‑temperature under‑bonnet conditions.
Which package suits high‑density PCB layouts?
It comes in an SC‑70 three‑pin surface‑mount package measuring 1.25x2mm footprint for tight component spacing.
How does the gate charge affect drive requirements?
With a typical Qg of 1nC, standard low‑current drivers can switch it quickly with minimal energy consumption.
Is it compatible with automotive reliability standards?
It meets AEC‑Q101 qualification appropriate for many vehicle electronic subsystems.
Gerelateerde Links
- Infineon SIPMOS Type P-Channel MOSFET, 150 mA, 60 V Enhancement, 3-Pin SC-70 BSS84PWH6327XTSA1
- Infineon SIPMOS Type N-Channel MOSFET, 280 mA, 60 V Enhancement, 3-Pin SC-70
- Infineon SIPMOS Type P-Channel MOSFET, 620 mA, 60 V Enhancement, 3-Pin SC-59
- Infineon SIPMOS Type N-Channel MOSFET, 280 mA, 60 V Enhancement, 3-Pin SC-70 BSS138WH6433XTMA1
- Infineon SIPMOS Type P-Channel MOSFET, 620 mA, 60 V Enhancement, 3-Pin SC-59 BSR315PH6327XTSA1
- Infineon OptiMOS P Type P-Channel MOSFET, 310 mA, 20 V Enhancement, 3-Pin SC-70
- Infineon OptiMOS P Type P-Channel MOSFET, 310 mA, 20 V Enhancement, 3-Pin SC-70 BSS223PWH6327XTSA1
- Infineon SIPMOS Type P-Channel MOSFET, 9.7 A, 60 V Enhancement, 3-Pin TO-252
