Infineon 700V CoolMOS P7 Type N-Channel MOSFET, 12.5 A, 700 V Enhancement, 3-Pin SOT-223

Bulkkorting beschikbaar
Bekijk bulkkorting

Subtotaal (1 rol van 3000 eenheden)*

€ 1.011,00

(excl. BTW)

€ 1.224,00

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 3.000 stuk(s) vanaf 10 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks
Per stuk
Per rol*
3000 - 3000€ 0,337€ 1.011,00
6000 +€ 0,32€ 960,00

*prijsindicatie

RS-stocknr.:
215-2525
Fabrikantnummer:
IPN70R360P7SATMA1
Fabrikant:
Infineon
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Infineon

Channel Type

Type N

Product Type

MOSFET

Maximum Continuous Drain Current Id

12.5A

Maximum Drain Source Voltage Vds

700V

Series

700V CoolMOS P7

Package Type

SOT-223

Mount Type

Surface

Pin Count

3

Maximum Drain Source Resistance Rds

360mΩ

Channel Mode

Enhancement

Typical Gate Charge Qg @ Vgs

16.4nC

Maximum Power Dissipation Pd

7.2W

Forward Voltage Vf

0.9V

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

150°C

Standards/Approvals

No

Automotive Standard

No

Infineon 700V CoolMOS P7 Series MOSFET, 700V Maximum Drain Source Voltage, 12.5A Maximum Continuous Drain Current - IPN70R360P7SATMA1


This MOSFET is a high-voltage N-channel switching device designed for surface-mount power applications. It operates across an extended ambient temperature range and is suited to circuits requiring robust voltage handling, low forward conduction drop and controlled gate driving. The component is supplied in a compact SOT-223 package intended for board-mounted power stages.

Features and Benefits:


• 700V rated drain tolerance enables high-voltage switching
• 360mΩ Rds(on) reduces conduction losses during load cycles
• 12.5A continuous drain current supports moderate power throughput
• 16.4nC typical gate charge allows predictable switching behaviour
• 0.9V forward voltage reduces voltage drop in conduction mode
• 7.2W maximum dissipation manages thermal load in compact layouts

Applications


• Suitable for offline switch-mode power supplies
• Ideal for high-voltage primary-side converters
• Used with resonant or hard-switching topologies
• Can be used for auxiliary power rails in industrial systems
• Used for medium-current boost and flyback stages

What gate voltage limits must be observed for safe operation?


The device must not be driven beyond ±20V between gate and source to prevent gate oxide stress.

How does the device behave across temperature extremes?


It is specified to operate from -55°C up to 150°C, allowing use in both cold-start and high-temperature environments with degraded Rds(on) expected at elevated temperatures.

What mounting considerations are relevant for thermal management?


As a surface-mount SOT-223 package, adequate copper area and thermal vias on the PCB are recommended to dissipate up to the 7.2W power limit.

How does gate charge influence drive requirements?


The typical 16.4nC gate charge defines the drive current and switching losses, informing the selection of gate drivers and snubbers for desired switching speed.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.