- RS-stocknr.:
- 819-3264
- Fabrikantnummer:
- K8AKPW2380480VAC
- Fabrikant:
- Omron
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 176,00
(excl. BTW)
€ 212,96
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 176,00 |
- RS-stocknr.:
- 819-3264
- Fabrikantnummer:
- K8AKPW2380480VAC
- Fabrikant:
- Omron
Wetgeving en conformiteit
Productomschrijving
Omron K8AK-PW/PM/PH/PA Monitoring Relays
The Omron K8AK series monitoring relays are expertly designed for accurate and reliable monitoring for industrial facilities and equipment.
The K8AK-PW/PM monitoring relays are designed to bear greater resistance to inverter noise, suitable for monitoring 3-phase power supplies.
The K8AK-PH relays are ideal for preventing issues with motor operation and assisting phase loss detection.
The K8AK-PA relays are suitable for 3-phase voltage asymmetry monitoring.
The K8AK-PW/PM monitoring relays are designed to bear greater resistance to inverter noise, suitable for monitoring 3-phase power supplies.
The K8AK-PH relays are ideal for preventing issues with motor operation and assisting phase loss detection.
The K8AK-PA relays are suitable for 3-phase voltage asymmetry monitoring.
K8AH-PW2 Monitoring Relay.
Resistant to inverter noise.
Monitors over voltage, under voltage for 3 and 4 wire power supplies.
Switch setting.
2 x SPDT output relays.
5 A (resistive load) at 250 V ac,
Separate outputs possible for over and under voltage
SPDT x 2.
Global power specification supported by one switchable unit.
Output status monitored by using LED indicator.
Monitors over voltage, under voltage for 3 and 4 wire power supplies.
Switch setting.
2 x SPDT output relays.
5 A (resistive load) at 250 V ac,
Separate outputs possible for over and under voltage
SPDT x 2.
Global power specification supported by one switchable unit.
Output status monitored by using LED indicator.
K8AK-PW2 Model.
Monitoring Relay
3-phase 3 wire mode, 380, 400, 415, 480 V ac.
3-phase 4 wire mode, 220, 230, 240, 277 V ac.
3-phase 3 or 4 wire input rages is switched using a DIP switch.
Power supply voltage is the same as the rated input value.
3-phase 3 wire mode, 380, 400, 415, 480 V ac.
3-phase 4 wire mode, 220, 230, 240, 277 V ac.
3-phase 3 or 4 wire input rages is switched using a DIP switch.
Power supply voltage is the same as the rated input value.
Features and Benefits.
Input load 4.4 VA
Automatic reset method.
Power on LOCK time 1 s/5s (changed with the DIP Switch).
Two SPDT relays NC (normally closed)
Power (PWR) indicator – Green.
Relay (RY) output – Yellow.
Over / under - Red
Case is PC and ABS, UL 94-V-0, N1.5.
Weight 150 g.
DIN Rail mounted.
Protection IP 20
What is a Monitoring / Measuring Relay?
A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.
Types of Monitoring Relays Available?
Motor protection relays
Temperature monitoring relays
Water level control relays
Voltage
Current
Temperature monitoring relays
Water level control relays
Voltage
Current
Standards
EN 60947-5-1, UL 508, IP 20
Specificaties
Kenmerk | Waarde |
---|---|
Monitoring Application | Voltage |
Electrical Phase | 3 |
Contact Configuration | SPDT |
Voltage Sensitivity | Overvoltage, Undervoltage |
Time Delay | 0.1 → 30s |
Series | K8AK-PW |
Height | 95mm |
Minimum Operating Temperature | -20°C |
Operating Temperature Range | +60°C |
Width | 100mm |
Maximum Operating Temperature | +60°C |
Dimensions | 22.5 x 100 x 95mm |
Length | 22.5mm |
- RS-stocknr.:
- 819-3264
- Fabrikantnummer:
- K8AKPW2380480VAC
- Fabrikant:
- Omron