Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Microchip
	Family Name	dsPIC30F
	Package Type	TQFP
	Mounting Type	Surface Mount
	Pin Count	40
	Device Core	dsPIC
	Data Bus Width	16bit
	Program Memory Size	24 kB
	Maximum Frequency	25MHz
	RAM Size	2 kB
	USB Channels	0
	Number of PWM Units	2 x 16 bit
	Number of SPI Channels	1
	Number of UART Channels	2
	Number of CAN Channels	0
	Number of I2C Channels	1
	Number of USART Channels	0
	Typical Operating Supply Voltage	2.5 → 5.5 V
	Number of ADC Units	1
	Number of PCI Channels	0
	Program Memory Type	Flash
	Minimum Operating Temperature	-40 °C
	Instruction Set Architecture	RISC
	Maximum Number of Ethernet Channels	0
	ADCs	13 x 12 bit
	Length	10mm
	Pulse Width Modulation	3 (16 bit)
	Dimensions	10 x 10 x 1mm
	Width	10mm
	Height	1mm
	Number of LIN Channels	0
	Number of Ethernet Channels	0
	Maximum Operating Temperature	+85 °C

	Alles selecteren
	Merk Microchip
	Family Name dsPIC30F
	Package Type TQFP
	Mounting Type Surface Mount
	Pin Count 40
	Device Core dsPIC
	Data Bus Width 16bit
	Program Memory Size 24 kB
	Maximum Frequency 25MHz
	RAM Size 2 kB
	USB Channels 0
	Number of PWM Units 2 x 16 bit
	Number of SPI Channels 1
	Number of UART Channels 2
	Number of CAN Channels 0
	Number of I2C Channels 1
	Number of USART Channels 0
	Typical Operating Supply Voltage 2.5 → 5.5 V
	Number of ADC Units 1
	Number of PCI Channels 0
	Program Memory Type Flash
	Minimum Operating Temperature -40 °C
	Instruction Set Architecture RISC
	Maximum Number of Ethernet Channels 0
	ADCs 13 x 12 bit
	Length 10mm
	Pulse Width Modulation 3 (16 bit)
	Dimensions 10 x 10 x 1mm
	Width 10mm
	Height 1mm
	Number of LIN Channels 0
	Number of Ethernet Channels 0
	Maximum Operating Temperature +85 °C

Datasheet - dsPIC30F3014

The dsPIC30F Digital Signal Controllers provides the performance of a DSP and simplicity of an MCU. Well suited for applications that benefit from a wide operating voltage (2.5 to 5.5V), extremely low standby current, integrated EEPROM and for the designers that prefer 5V operation due to systems considerations. The 30MIPS dsPIC30F variants integrate motor control peripherals, SMPS peripherals and a Codec interface that enable advanced motor control algorithms, efficient digital power converters and speech & audio applications. Small package DSCs with high performance ADC are best suited for smart sensing applications.

Flash Program Memory
RISC Instruction Set Architecture
Operating Temperature Range: -40 to +85 °C

Microchip, 16bit dsPIC, dsPIC30F Microcontroller, 25MHz, 24 kB Flash, 40-Pin TQFP

Gerelateerde Links