Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Microchip
	Family Name	dsPIC30F
	Package Type	PDIP
	Mounting Type	Through Hole
	Pin Count	18
	Device Core	dsPIC
	Data Bus Width	16bit
	Program Memory Size	24 kB
	Maximum Frequency	25MHz
	RAM Size	2 kB
	USB Channels	0
	Number of PWM Units	2 x 16 bit
	Number of SPI Channels	1
	Number of I2C Channels	1
	Number of USART Channels	0
	Typical Operating Supply Voltage	2.5 → 5.5 V
	Number of CAN Channels	0
	Number of UART Channels	1
	Maximum Number of Ethernet Channels	0
	ADCs	8 x 10 bit
	Instruction Set Architecture	RISC
	Length	22.99mm
	Number of ADC Units	1
	Program Memory Type	Flash
	Maximum Operating Temperature	+85 °C
	Minimum Operating Temperature	-40 °C
	Number of Ethernet Channels	0
	Pulse Width Modulation	2 (16 bit)
	Width	6.6mm
	Number of LIN Channels	0
	Height	3.68mm
	Number of PCI Channels	0
	Dimensions	22.99 x 6.6 x 3.68mm

	Alles selecteren
	Merk Microchip
	Family Name dsPIC30F
	Package Type PDIP
	Mounting Type Through Hole
	Pin Count 18
	Device Core dsPIC
	Data Bus Width 16bit
	Program Memory Size 24 kB
	Maximum Frequency 25MHz
	RAM Size 2 kB
	USB Channels 0
	Number of PWM Units 2 x 16 bit
	Number of SPI Channels 1
	Number of I2C Channels 1
	Number of USART Channels 0
	Typical Operating Supply Voltage 2.5 → 5.5 V
	Number of CAN Channels 0
	Number of UART Channels 1
	Maximum Number of Ethernet Channels 0
	ADCs 8 x 10 bit
	Instruction Set Architecture RISC
	Length 22.99mm
	Number of ADC Units 1
	Program Memory Type Flash
	Maximum Operating Temperature +85 °C
	Minimum Operating Temperature -40 °C
	Number of Ethernet Channels 0
	Pulse Width Modulation 2 (16 bit)
	Width 6.6mm
	Number of LIN Channels 0
	Height 3.68mm
	Number of PCI Channels 0
	Dimensions 22.99 x 6.6 x 3.68mm

Datasheet - dsPIC30F3012

The dsPIC30F Digital Signal Controllers provides the performance of a DSP and simplicity of an MCU. Well suited for applications that benefit from a wide operating voltage (2.5 to 5.5V), extremely low standby current, integrated EEPROM and for the designers that prefer 5V operation due to systems considerations. The 30MIPS dsPIC30F variants integrate motor control peripherals, SMPS peripherals and a Codec interface that enable advanced motor control algorithms, efficient digital power converters and speech & audio applications. Small package DSCs with high performance ADC are best suited for smart sensing applications.

RISC Instruction Set Architecture
Operating Temperature Range: -40 to +85 °C

Microchip, 16bit dsPIC, dsPIC30F Microcontroller, 25MHz, 24 kB Flash, 18-Pin PDIP

Gerelateerde Links