Lenze ETP EXPRESS 25MM, 30mm ID, 25 mm OD Locking Bush, 49 mm, Steel, 230 Nm
- RS-stocknr.:
- 477-6846
- Fabrikantnummer:
- ETP EXPRESS 25MM
- Fabrikant:
- Lenze
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 269,54
(excl. BTW)
€ 326,14
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 12 stuk(s) vanaf 30 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 269,54 |
*prijsindicatie
- RS-stocknr.:
- 477-6846
- Fabrikantnummer:
- ETP EXPRESS 25MM
- Fabrikant:
- Lenze
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Lenze | |
| Torque Rating | 230Nm | |
| Product Type | Locking Bush | |
| Bore Diameter | 30mm | |
| Length | 49mm | |
| Material | Steel | |
| Series | ETP EXPRESS | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Lenze | ||
Torque Rating 230Nm | ||
Product Type Locking Bush | ||
Bore Diameter 30mm | ||
Length 49mm | ||
Material Steel | ||
Series ETP EXPRESS | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- SE
ETP Express Locking Bushes
Unique single screw hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for ultra-fast mounting of gears, pulleys, sprockets etc where frequent operations and very high accuracy are required.
Very high concentricity and self-centering
Ultra-fast, locking and un-locking with single pressure screw
Radial pressure screw for easy access
Automatic release when screw is loosened
Ideal for applications with very small diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.03mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.5, Cast Iron x 2.0, Aluminium x 2.5. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.
Gerelateerde Links
- Lenze ETP EXPRESS 30MM, 36mm ID, 30 mm OD Locking Bush, 54 mm, Steel, 380 Nm
- Lenze ETP EXPRESS 50MM, 60mm ID, 50 mm OD Locking Bush, 80 mm, Steel, 1900 Nm
- Lenze ETP EXPRESS 35MM, 42mm ID, 72 mm OD Locking Bush, 59 mm, Steel, 640 Nm
- Lenze ETP EXPRESS 15MM, 18mm ID, 15 mm OD Locking Bush, 39 mm, Steel, 46 Nm
- Lenze ETP EXPRESS 20MM, 24mm ID, 20 mm OD Locking Bush, 44 mm, Steel, 110 Nm
- Lenze ETP EXPRESS 40MM, 48mm ID, 40 mm OD Locking Bush, 75 mm, Steel, 1100 Nm
- Lenze ETP EXPRESS 32MM, 39mm ID, 32 mm OD Locking Bush, 56 mm, Steel, 440 Nm
- Lenze ETP EXPRESS 22MM, 27mm ID, 22 mm OD Locking Bush, 46 mm, Steel, 130 Nm