Lenze ETP EXPRESS 45MM 45 mm
- RS-stocknr.:
- 477-6919
- Fabrikantnummer:
- ETP EXPRESS 45MM
- Fabrikant:
- Lenze
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 418,74
(excl. BTW)
€ 506,68
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 2 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 418,74 |
*prijsindicatie
- RS-stocknr.:
- 477-6919
- Fabrikantnummer:
- ETP EXPRESS 45MM
- Fabrikant:
- Lenze
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Lenze | |
| Product Type | Locking Bush | |
| Torque Rating | 1400Nm | |
| Outside Diameter | 45 mm | |
| Length | 78mm | |
| Material | Steel | |
| Series | ETP EXPRESS | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Lenze | ||
Product Type Locking Bush | ||
Torque Rating 1400Nm | ||
Outside Diameter 45 mm | ||
Length 78mm | ||
Material Steel | ||
Series ETP EXPRESS | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- SE
ETP Express Locking Bushes
Unique single screw hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for ultra-fast mounting of gears, pulleys, sprockets etc where frequent operations and very high accuracy are required.
Very high concentricity and self-centering
Ultra-fast, locking and un-locking with single pressure screw
Radial pressure screw for easy access
Automatic release when screw is loosened
Ideal for applications with very small diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.03mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.5, Cast Iron x 2.0, Aluminium x 2.5. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.