Lenze ETP CLASSIC 50MM 50 mm
- RS-stocknr.:
- 477-6751
- Fabrikantnummer:
- ETP CLASSIC 50MM
- Fabrikant:
- Lenze
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 362,53
(excl. BTW)
€ 438,66
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 23 februari 2026
- Plus verzending 1 stuk(s) vanaf 27 februari 2026
- Plus verzending 3 stuk(s) vanaf 20 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 362,53 |
*prijsindicatie
- RS-stocknr.:
- 477-6751
- Fabrikantnummer:
- ETP CLASSIC 50MM
- Fabrikant:
- Lenze
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Lenze | |
| Torque Rating | 1900Nm | |
| Product Type | Locking Bush | |
| Outside Diameter | 50 mm | |
| Length | 82mm | |
| Material | Steel | |
| Series | ETP CLASSIC | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Lenze | ||
Torque Rating 1900Nm | ||
Product Type Locking Bush | ||
Outside Diameter 50 mm | ||
Length 82mm | ||
Material Steel | ||
Series ETP CLASSIC | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- JP
ETP Classic Locking Bushes
Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc.
High concentricity and self-centering
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.7, Cast Iron x 2.2, Aluminium x 2.7. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.