Lenze ETP CLASSIC 25MM, 34mm ID, 25 mm OD Locking Bush, 43 mm, Steel, 250 Nm
- RS-stocknr.:
- 477-6666
- Fabrikantnummer:
- ETP CLASSIC 25MM
- Fabrikant:
- Lenze
Subtotaal (1 eenheid)*
€ 211,26
(excl. BTW)
€ 255,62
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 25 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 211,26 |
*prijsindicatie
- RS-stocknr.:
- 477-6666
- Fabrikantnummer:
- ETP CLASSIC 25MM
- Fabrikant:
- Lenze
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Lenze | |
| Product Type | Locking Bush | |
| Torque Rating | 250Nm | |
| Bore Diameter | 34mm | |
| Length | 43mm | |
| Material | Steel | |
| Series | ETP CLASSIC | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Lenze | ||
Product Type Locking Bush | ||
Torque Rating 250Nm | ||
Bore Diameter 34mm | ||
Length 43mm | ||
Material Steel | ||
Series ETP CLASSIC | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- JP
ETP Classic Locking Bushes
Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc.
High concentricity and self-centering
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.7, Cast Iron x 2.2, Aluminium x 2.7. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.
Gerelateerde Links
- Lenze ETP CLASSIC 20MM, 20mm ID, 20 mm OD Locking Bush, 42 mm, Steel, 125 Nm
- Lenze ETP CLASSIC 40MM, 70mm ID, 40 mm OD Locking Bush, 68 mm, Steel, 940 Nm
- Lenze ETP CLASSIC 24MM, 49mm ID, 24 mm OD Locking Bush, 45 mm, Steel, 200 Nm
- Lenze ETP CLASSIC 45MM, 77mm ID, 45 mm OD Locking Bush, 75 mm, Steel, 1290 Nm
- Lenze ETP CLASSIC 50MM, 83mm ID, 50 mm OD Locking Bush, 82 mm, Steel, 1900 Nm
- Lenze ETP CLASSIC 32MM, 60mm ID, 32 mm OD Locking Bush, 57 mm, Steel, 420 Nm
- Lenze ETP CLASSIC 15MM, 38mm ID, 15 mm OD Locking Bush, 35 mm, Steel, 55 Nm
- Lenze ETP CLASSIC 30MM, 57mm ID, 30 mm OD Locking Bush, 52 mm, Steel, 420 Nm