Onlangs gezocht

    Honeywell GLE Series Roller Plunger Limit Switch, NO/NC, IP66, SPDT, Die Cast Zinc Housing, 300V ac Max, 10A Max

    RS-stocknr.:
    186-8425
    Fabrikantnummer:
    GLEB01C
    Fabrikant:
    Honeywell
    Honeywell
    Bekijk alle Limit Switches
    19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    40 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    138,62 €

    (excl. BTW)

    167,73 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +138,62 €
    RS-stocknr.:
    186-8425
    Fabrikantnummer:
    GLEB01C
    Fabrikant:
    Honeywell
    Land van herkomst:
    GB

    Wetgeving en conformiteit

    Land van herkomst:
    GB

    Productomschrijving

    Honeywell GLE Series Limit Switches


    The GLE series from Honeywell forms part of the larger GLS limit switches range. GLE limit switches are compact, rugged and versatile. With a small footprint, these limit switches are ideal for applications where a limited amount of space is available. This series are construted from three-conduit rugged housing and can operate in harsh environments.

    Features:


    • Galvanically isolated contacts give you control over two separate circuits.
    • The NC (normally closed) contacts are direct acting. This ensures that they will open when actuated.
    • The use of a dual bearing design for the side rotary actuators enhances the mechanical life of the unit while reducing die loading.
    • Able to withstand wash downs, shock and vibrations.
    • Reliable and accurate.
    • Wide operating temperature range of -40 °C to +85 °C.
    • 20 mm to 22 mm mounting holes.

    Benefits:


    • GLE limit switches have an outstanding mechanical lifespan, to 10 million operations.
    • The actuators or heads can be positioned at increments of 90°. This offers you incredible flexibility with your designs and allows you to use these limit switches for a range of environments or applications.
    • Models with side rotary actuator heads can be set up so that the actuation is clockwise, anti clockwise or both.
    • You can easily customise this range of limit switches due to the modular design of the unit. Bodies, contact blocks and heads can all be adjusted and customised.
    • Featuring a removable contact block, these limit switches are incredibly easy to wire up. They are designed for easy installation.
    • Various conduit sizes are available allowing these limit switches to be used for different global applications.

    Product Applications:


    Suitable product applications include:
    • Elevators
    • Scissor lifts and platform lists
    • Escalators and moving stairs
    • Lift trucks
    • Off-road equipment
    • Transportation equipment
    • Commercial appliances
    • Material handling equipment
    • Packaging machinery
    • Textile machinery
    • Construction machinery
    • Machine tooling equipment
    • Agricultural equipment

    What is the difference between the GLC, GLD and GLE series?


    The difference that separates the series is the housing. GLE limit switches feature 3-conduit metal housing, while the GLC series have single conduit metal housing and GLD limit switches have plastic housing.

    Standards

    IEC/EN 60947-5-1
    While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

    EN50047
    GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

    IP 66
    A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

    Sealed to NEMA 1, 4, 12, 13
    NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
    NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
    NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
    NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.

    Warning

    GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

    Approvals

    UL, CSA, CE, CCC

    Honeywell Limit Switch, 10A Current Rating, NO/NC Contact Configuration - GLE Series - GLEB01C


    Looking for a way to accurately control the movement of your machinery? Choose this limit switch from Honeywell. Its roller plunger actuator closely follows contours, making it suitable for positioning items with curved surfaces. As it features a snap-action mechanism, the device ensures rapid switching for high levels of efficiency. The component has silver contacts that are highly conductive and corrosion-resistant for reliable performance.

    Features & Benefits


    • IP66 rating indicates complete protection from dust and high-pressure water jets
    • Long mechanical lifespan of up to 10 million operations for long-lasting performance
    • Epoxy-coated zinc housing for resistance to corrosion and wear
    • Wide operating temperature range between -40°C and +85°C for use in demanding environments

    Applications


    • Conveyor belts
    • Packing plants
    • Cutting machines
    • Manufacturing industry

    What's the current rating of this limit switch?


    This switch has a current rating of 10A, making it suitable for use in high-power applications.

    Approvals

    CSA; UL; CE

    Approvals

    UL/ UL listed for Canada

    Specificaties

    KenmerkWaarde
    Actuator TypeRoller Plunger
    Pole and Throw ConfigurationSPDT
    Normal State ConfigurationNO/NC
    IP RatingIP66
    Maximum Current10A
    Housing MaterialDie Cast Zinc
    Maximum AC Voltage300V
    Maximum DC Voltage250V
    Connection TypePG13.5
    SeriesGLE
    Action TypeSnap Action
    Length50mm
    Width65mm
    Depth30mm
    Maximum Operating Temperature+85°C
    Standards MetCCC, CE, CSA, UL
    Minimum Operating Temperature-40°C
    Mounting OrientationSide
    Mechanical Life15000000Operations
    19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    40 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    138,62 €

    (excl. BTW)

    167,73 €

    (incl. BTW)

    Aantal stuksPer stuk
    1 +138,62 €