Eaton 3P Pole Isolator Switch - 32A Maximum Current, 12kW Power Rating, IP65

RS-stocknr.:: 773-0641
Fabrikantnummer:: 227872 P1-32/I2H/SVB-SW
Fabrikant:: Eaton

Eaton 3P Pole Isolator Switch - 32A Maximum Current, 12kW Power Rating, IP65

Afbeelding representeert productcategorie

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 73,40

(excl. BTW)

€ 88,81

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 73,40
5 - 11	€ 71,14
12 +	€ 68,84

*prijsindicatie

RS-stocknr.:: 773-0641
Fabrikantnummer:: 227872 P1-32/I2H/SVB-SW
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Number of Poles	3P
	Maximum Current	32A
	IP Rating	IP65
	Power Rating	12kW
	Voltage Rating	690V ac
	Handle Colour	Black
	Accepts Padlocks	Yes
	Normal State Configuration	3NO
	Length	160mm
	Width	100mm
	Depth	80mm
	Maximum Operating Temperature	+40°C
	Minimum Operating Temperature	-25°C
	Terminal Type	Screw
	Throw Configuration	Single

	Alles selecteren
	Merk Eaton
	Number of Poles 3P
	Maximum Current 32A
	IP Rating IP65
	Power Rating 12kW
	Voltage Rating 690V ac
	Handle Colour Black
	Accepts Padlocks Yes
	Normal State Configuration 3NO
	Length 160mm
	Width 100mm
	Depth 80mm
	Maximum Operating Temperature +40°C
	Minimum Operating Temperature -25°C
	Terminal Type Screw
	Throw Configuration Single

Land van herkomst:: GB

Eaton Enclosed Non-Fused Switch Disconnector – P1 Series

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Introducing the P1 range of enclosed switch disconnectors from Eaton. On these switches, the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and manual overrode switches.

Features & Benefits

• Thermoplastic enclosure
• Surface mounting
• Black rotary handle and locking ring
• Lockable in the 0 (Off) position
• IP65 ingress protection rating
• The perfect solution for installing as a safety measure

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Eaton formerly known as Moeller