- RS-stocknr.:
- 621-7838
- Fabrikantnummer:
- 280897 P5-125/E
- Fabrikant:
- Eaton
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04/06/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 209,52
(excl. BTW)
€ 253,52
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 209,52 |
5 - 11 | € 203,12 |
12 + | € 196,54 |
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 621-7838
- Fabrikantnummer:
- 280897 P5-125/E
- Fabrikant:
- Eaton
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
Eaton Panel Mount Isolator Switch
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions are when used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Rated uninterrupted current of up to 32 A
Lockable in the 0/OFF position, with up to three padlocks
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Common accessories: 262-3784, 219-1445, 219-1439
Used as an emergency switching off/emergency stop device
The basic functions are when used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Rated uninterrupted current of up to 32 A
Lockable in the 0/OFF position, with up to three padlocks
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Common accessories: 262-3784, 219-1445, 219-1439
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Note
Eaton formerly known as Moeller
Specificaties
Kenmerk | Waarde |
---|---|
Number of Poles | 3P |
Maximum Current | 125A |
Mounting Type | Panel Mount |
IP Rating | IP65 |
Power Rating | 45kW |
Voltage Rating | 415V ac |
Electrical Phase | 3 |
Handle Colour | Black |
Normal State Configuration | NO |
Series | Eaton Moeller |
Auxiliary Contacts Available | Yes |
Switch Rating | 2500A |
Length | 112mm |
Width | 88mm |
Depth | 91mm |
Throw Configuration | Single |
Minimum Operating Temperature | -25°C |
Maximum Operating Temperature | +50°C |
Terminal Type | Screw |
- RS-stocknr.:
- 621-7838
- Fabrikantnummer:
- 280897 P5-125/E
- Fabrikant:
- Eaton