Eaton 1-Pole Surface Isolator Switch -, IP65, 0A, 13 kW

RS-stocknr.:: 393-9692
Fabrikantnummer:: 78634628 T3-1-8200/I2H/SVB/K-CI-K1/2(RS393-9692)
Fabrikant:: Eaton

Eaton 1-Pole Surface Isolator Switch -, IP65, 0A, 13 kW

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 78,37

(excl. BTW)

€ 94,83

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Tijdelijk niet op voorraad

Verzending 1 stuk(s) vanaf 20 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 78,37
5 - 11	€ 75,93
12 +	€ 73,51

*prijsindicatie

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Eaton 2-Pole Surface Isolator Switch -, IP65, 32A, 13 kW

RS-stocknr.: 393-9721

Per stuk

€ 80,73

(excl. BTW)

€ 97,68

(incl. BTW)

RS-stocknr.:: 393-9692
Fabrikantnummer:: 78634628 T3-1-8200/I2H/SVB/K-CI-K1/2(RS393-9692)
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Number of Poles	1
	Product Type	Isolator Switch
	Mount Type	Surface
	IP Rating	IP65
	Electrical Phase	1
	Handle Colour	Red
	Series	T3-1
	Terminal Type	Screw
	Switching Current	0A
	Auxiliary Contacts Available	No
	Minimum Operating Temperature	-25°C
	Switching Power	13kW
	Padlock Compatibility	No
	Maximum Operating Temperature	40°C
	Standards/Approvals	UL, CSA, IEC
	Width	100mm
	Depth	80mm
	Hazardous Area Certification	No
	Length	180mm

	Alles selecteren
	Merk Eaton
	Number of Poles 1
	Product Type Isolator Switch
	Mount Type Surface
	IP Rating IP65
	Electrical Phase 1
	Handle Colour Red
	Series T3-1
	Terminal Type Screw
	Switching Current 0A
	Auxiliary Contacts Available No
	Minimum Operating Temperature -25°C
	Switching Power 13kW
	Padlock Compatibility No
	Maximum Operating Temperature 40°C
	Standards/Approvals UL, CSA, IEC
	Width 100mm
	Depth 80mm
	Hazardous Area Certification No
	Length 180mm

Vrijgesteld

Land van herkomst:: GB

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions: used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Built-in earth commoning block

• Lockable in the 0/OFF position, with up to three padlocks

• Totally insulated

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V