Robin-Amprobe KMP7036 Insulation Tester, 250 V Min, 1000 V Max CAT III
- RS-stocknr.:
- 794-3128
- Fabrikantnummer:
- KMP7036
- Fabrikant:
- Robin-Amprobe
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 794-3128
- Fabrikantnummer:
- KMP7036
- Fabrikant:
- Robin-Amprobe
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Robin-Amprobe | |
| Product Type | Insulation Tester | |
| Model Number | KMP7036 | |
| Tester Type | Insulation Tester | |
| Minimum Test Voltage | 250V | |
| Maximum Test Voltage | 1000V | |
| Display Type | LCD | |
| Test Current | 1mA | |
| Power Source | Battery | |
| Battery Type | AA | |
| Minimum Operating Temperature | 0°C | |
| Safety Category Level | CAT III | |
| Maximum Operating Temperature | 35°C | |
| Safety Category Voltage | 600V | |
| Width | 101 mm | |
| Height | 71mm | |
| Length | 160mm | |
| Standards/Approvals | BS EN 613261, BS EN 610101, BS EN 61557 | |
| Weight | 600g | |
| Alles selecteren | ||
|---|---|---|
Merk Robin-Amprobe | ||
Product Type Insulation Tester | ||
Model Number KMP7036 | ||
Tester Type Insulation Tester | ||
Minimum Test Voltage 250V | ||
Maximum Test Voltage 1000V | ||
Display Type LCD | ||
Test Current 1mA | ||
Power Source Battery | ||
Battery Type AA | ||
Minimum Operating Temperature 0°C | ||
Safety Category Level CAT III | ||
Maximum Operating Temperature 35°C | ||
Safety Category Voltage 600V | ||
Width 101 mm | ||
Height 71mm | ||
Length 160mm | ||
Standards/Approvals BS EN 613261, BS EN 610101, BS EN 61557 | ||
Weight 600g | ||
Vrijgesteld
- Land van herkomst:
- CN
KMP7036 Insulation Tester
The KMP7036 Insulation-Continuity Tester is used for accurately measuring the insulation of electrical equipment, ensuring that electricity has a direct path to flow safely and there is no risk to those around the area. The Isolation Tester can test cables, wires, transformers, electrical motors and other similar devices to evaluate if insulation breakdown has become excessive; if so, steps can be taken to fix the problems long before they become a significant danger.
Tests insulation of wires, cables, transformers and electrical motors
Selectable test voltages 250V, 500V and 1000V
Test button hold to perform the Dielectric Absorption Ratio Test
Continuity test at 200mA short-circuit
Built in voltmeter and red light warning for live circuit indication
Large, backlit display
Automatic discharge of test object after completion of measurement
Data Hold
Test lead resistance zero facility
Low battery indication
Safety CAT III 600V
Supplied with
2 x test leads, 2 x test probes, 2 x alligator clips, 6 x AA batteries, user manual, carry case and strap
Gerelateerde Links
- Beha-Amprobe Insulation Tester, 100 V Min, 1000 V Max, 1 MΩ CAT III, CAT III
- Gossen Metrawatt Insulation Tester, 50 V Min, 1000 V Max CAT II, CAT IV, CAT III
- Fluke 1587 Insulation Tester, 50 V Min, 1000 V Max CAT IV, CAT III
- Fluke 1577 Insulation Tester, 500 V Min, 1000 V Max CAT III, CAT IV
- Fluke 1507 Insulation Tester, 50 V Min, 1000 V Max CAT III, CAT IV
- RS PRO IPM245F Insulation Tester, 125 V Min, 1000 V Max CAT III, CAT IV
- UNI-T UT511 Insulation Resistance Tester, 1000 V Max, 10 GΩ CAT III, CAT II
- UNI-T UT505B Insulation Resistance Tester, 1000 V Max, 200 GΩ CAT IV, CAT III