Beha-Amprobe 93530 Insulation Tester, 100 V Min, 1000 V Max, 999 CAT III, CAT III

RS-stocknr.:: 794-3254
Fabrikantnummer:: 93530-D
Fabrikant:: Beha-Amprobe

Beha-Amprobe 93530 Insulation Tester, 100 V Min, 1000 V Max, 999 CAT III, CAT III

Momenteel niet beschikbaar

We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.

Kalibratie-opties

Beha-Amprobe 93530 Insulation Tester, 100 V Min, 1000 V Max, 999 CAT III, CAT III, RSCAL

Calibration Type:: RSCAL

RS-stocknr.: 912-0055

Per stuk

€ 655,00

(excl. BTW)

€ 792,55

(incl. BTW)

Beha-Amprobe 93530 Insulation Tester, 100 V Min, 1000 V Max, 999 CAT III, CAT III, UKAS

Calibration Type:: UKAS

RS-stocknr.: 912-0059

Per stuk

€ 684,00

(excl. BTW)

€ 827,64

(incl. BTW)

RS-stocknr.:: 794-3254
Fabrikantnummer:: 93530-D
Fabrikant:: Beha-Amprobe

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Beha-Amprobe
	Product Type	Insulation Tester
	Model Number	93530
	Tester Type	Insulation Tester
	Maximum Test Voltage	1000V
	Minimum Test Voltage	100V
	Display Type	LCD, LCD
	Test Current	1, 1mA
	Power Source	Battery, Battery
	Battery Type	LR6, LR6
	Insulation Testing Resistance	999
	Safety Category Level	CAT III, CAT III
	Safety Category Voltage	600, 600V
	Height	48mm
	Standards/Approvals	No
	Length	200mm
	Width	95mm
	Weight	500g

	Alles selecteren
	Merk Beha-Amprobe
	Product Type Insulation Tester
	Model Number 93530
	Tester Type Insulation Tester
	Maximum Test Voltage 1000V
	Minimum Test Voltage 100V
	Display Type LCD, LCD
	Test Current 1, 1mA
	Power Source Battery, Battery
	Battery Type LR6, LR6
	Insulation Testing Resistance 999
	Safety Category Level CAT III, CAT III
	Safety Category Voltage 600, 600V
	Height 48mm
	Standards/Approvals No
	Length 200mm
	Width 95mm
	Weight 500g

93530 Isolationsmessgerät

Vrijgesteld

Land van herkomst:: TW

Fluke Insulation Tester, 1000V Maximum Test Voltage, 1mA Test Current - 93530-D

This insulation tester is a handheld instrument designed to measure insulation resistance and verify electrical safety in installation and maintenance tasks. It operates from battery power and provides selectable test voltages across a practical range, delivering clear readouts on an LCD suitable for field environments where portability and Basic diagnostics are required.

Features and Benefits:

• 1000V maximum test voltage for high-voltage insulation checks
• 100V minimum test voltage for low-voltage diagnostics
• 1mA test current to assess insulation under controlled stress
• 1MΩ insulation resistance range for standard insulation verification
• Battery operation using LR6 cells for on-site independence

Applications

• Suitable for verifying cable insulation during installation
• Ideal for routine maintenance on electrical equipment
• Used for commissioning low- and high-voltage circuits
• Can be used for field troubleshooting of insulation faults
• Appropriate for electricians performing site safety checks

What display technology is used to read measurements?

An LCD provides numeric readout of test results for straightforward interpretation.

Which safety classification applies to this device?

It is rated to CAT III at 600V for use in building wiring and distribution-level testing.

How portable is the instrument for site work?

The unit is Compact and lightweight, measuring 200 mm in length and weighing 500 g for easy transport.

What power source does it require during operation?

It runs on LR6 battery cells, enabling operation without mains power.

What physical footprint should I allow for storage or carry?

The tester’s width is 95 mm and its height is 48 mm, allowing simple storage in tool kits.

Supplied with

2 x test leads, alligator clip, probe tip, handy case, 6 x 1.5 V, type IEC LR6, AA batteries, instruction manual.