Omron K7GE-MGMA Insulation Resistance Tester
- RS-stocknr.:
- 239-8224
- Fabrikantnummer:
- K7GE-MGMD
- Fabrikant:
- Omron
Subtotaal (1 eenheid)*
€ 796,39
(excl. BTW)
€ 963,63
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 29 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 796,39 |
*prijsindicatie
- RS-stocknr.:
- 239-8224
- Fabrikantnummer:
- K7GE-MGMD
- Fabrikant:
- Omron
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Omron | |
| Product Type | Insulation Tester | |
| Model Number | K7GE-MGMA | |
| Tester Type | Insulation Resistance Tester | |
| Display Type | LCD | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 65°C | |
| Standards/Approvals | EN/IEC 61326-1, CAN/CSA-C22.2 No.61010-1, CE, UL 61010-1 | |
| Alles selecteren | ||
|---|---|---|
Merk Omron | ||
Product Type Insulation Tester | ||
Model Number K7GE-MGMA | ||
Tester Type Insulation Resistance Tester | ||
Display Type LCD | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 65°C | ||
Standards/Approvals EN/IEC 61326-1, CAN/CSA-C22.2 No.61010-1, CE, UL 61010-1 | ||
- Land van herkomst:
- JP
The Omron insulation resistance monitoring device is used for 3-phase & servo motors, pumps and heaters. It has power supply voltage from 24 VAC/VDC and transistor control output. This device automatically measures the insulation resistance of a load and supports trend monitoring. Periodic inspections by manpower may cause a unexpected machine stoppage due to a decrease in insulation resistance of equipment before the next inspection. It provides automatic monitoring of the insulation resistance of each load and allows planned maintenance. This device measures the insulation resistance by the same detection principle (megger method) as a megohmmeter. To measure the insulation resistance it is necessary to combine one main unit with at least one probe unit. It constantly monitors the voltage applied to the device targeted for measurement, and automatically stops measurement if the target device power is turned ON after measurement has started. It belongs to RS-485/Modbus/RTU protocols.
Measures insulation resistance automatically when a trigger signal is input
Highly reproducible measurement with experienced maintenance know-how incorporated
Reduced risk of equipment failure due to measurement with fixed DC 50 V
Able to measure up to eight points simultaneously
High frequency of measurements to accurately identify equipment abnormalities
Reduced equipment failure risk
Remote data assessment via network connection
Easy measurement data collection and trend monitoring by using a dedicated tool
Push-in Plus terminal block type
Gerelateerde Links
- Omron K7GE-MGMA Insulation Resistance Tester
- Omron K7GE-MG1 Insulation Tester Probe Probe Unit, For Use With K7GE-MGM
- Megger 1008-022 Insulation Tester HV Test Lead Set Lead, For Use With Insulation Resistance Testers
- Kyoritsu K3132A Insulation Resistance Tester, 250 V Min, 1000 V Max
- Gossen Metrawatt SECULIFE ST PRO PAT Tester, Leakage Current, Insulation Resistance Test Type
- Kyoritsu K6024PV Insulation Resistance Tester, 250 V Min, 1000 V Max, 2000 mΩ CAT IV
- UNI-T UT505B Insulation Resistance Tester, 1000 V Max, 200 GΩ CAT IV, CAT III
- UNI-T UT511 Insulation Resistance Tester, 1000 V Max, 10 GΩ CAT III, CAT II