Marl White LED Indicator Lamp, 48V ac/dc, BA9s Base, 4.9mm Diameter, 9200mcd
- RS-stocknr.:
- 469-840
- Fabrikantnummer:
- 255-993-64-38
- Fabrikant:
- Marl
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 32,68
(excl. BTW)
€ 39,54
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 11 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 40 stuk(s) vanaf 22 december 2025
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 14 | € 32,68 |
| 15 - 49 | € 29,64 |
| 50 - 99 | € 22,06 |
| 100 - 249 | € 18,40 |
| 250 + | € 16,34 |
*prijsindicatie
- RS-stocknr.:
- 469-840
- Fabrikantnummer:
- 255-993-64-38
- Fabrikant:
- Marl
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Marl | |
| Voltage Rating | 48V ac/dc | |
| Light Output Colour | White | |
| Lamp Type | LED | |
| Intensity | 9200mcd | |
| Lamp Base | BA9s | |
| Chip Type | Single Chip | |
| Diameter | 4.9mm | |
| Length | 26mm | |
| Current Rating | 10mA | |
| Life Hours | 100000h | |
| Alles selecteren | ||
|---|---|---|
Merk Marl | ||
Voltage Rating 48V ac/dc | ||
Light Output Colour White | ||
Lamp Type LED | ||
Intensity 9200mcd | ||
Lamp Base BA9s | ||
Chip Type Single Chip | ||
Diameter 4.9mm | ||
Length 26mm | ||
Current Rating 10mA | ||
Life Hours 100000h | ||
- Land van herkomst:
- GB
T3 BA9s MBC Ultra-Bright SOLO, 255 Series
Design allows consistent optimum brightness levels due to internal intelligent circuitry
Bipolar - operates at any voltage between 8 and 48Vac/dc
Minimal power consumption with low heat generation
High reliability - MTBF 100 000 hours
Internal potting provides shock and vibration resistance
Bipolar - operates at any voltage between 8 and 48Vac/dc
Minimal power consumption with low heat generation
High reliability - MTBF 100 000 hours
Internal potting provides shock and vibration resistance
Note
These LEDs should only be used with suitably rated lampholders. Live parts should be inaccessible when in use. 110Vac LEDs cannot be used with a dropper resistor on 230Vac
MARL, Single Chip LEDs
A series of ultra-bright, sunlight-readable, water-clear LEDs suitable for a variety of applications. Specially manufactured lens provides a very wide viewing angle and high intensity output. Intensities are stated at the following viewing angles for the LEDs: Red 30°, Green 15°, Yellow 16°, Blue 15°, White 45°.
Gerelateerde Links
- Marl White LED Indicator Lamp, 24V dc, BA9s Base, 4.9mm Diameter, 9200mcd
- Marl White LED Indicator Lamp, 12V dc, BA9s Base, 4.9mm Diameter, 9200mcd
- Marl White LED Indicator Lamp, 24 → 28V dc, BA9s Base, 4.9mm Diameter, 9200mcd
- Marl White LED Indicator Lamp, 12V dc, Midget Groove Base, 4.9mm Diameter, 9200mcd
- Marl White LED Indicator Lamp, 24V dc, Midget Groove Base, 4.9mm Diameter, 9200mcd
- Marl Green LED Indicator Lamp, 8-48V ac/dc, BA9s Base, 4.9mm Diameter, 23000mcd
- Marl White LED Indicator Lamp, 8-48V ac/dc, BA9s Base, 4.9mm Diameter, 785mcd
- Marl Yellow LED Indicator Lamp, 8-48V ac/dc, BA9s Base, 4.9mm Diameter, 16000mcd
