Siemens 3SE5 Safety Hinge Switch 1 NO/1 NC
- RS-stocknr.:
- 227-961
- Fabrikantnummer:
- 3SE5232-0HU22
- Fabrikant:
- Siemens
Subtotaal (1 eenheid)*
€ 61,11
(excl. BTW)
€ 73,94
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 61,11 |
*prijsindicatie
- RS-stocknr.:
- 227-961
- Fabrikantnummer:
- 3SE5232-0HU22
- Fabrikant:
- Siemens
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Siemens | |
| Product Type | Safety Hinge Switch | |
| Series | 3SE5 | |
| Contact Configuration | 1 NO/1 NC | |
| Housing Material | Plastic | |
| Number of Cable Entries | 2 | |
| Terminal Type | Screw | |
| IP Rating | IP65 | |
| Cable Entry Size | M20 x 1.5 | |
| Minimum Operating Temperature | -25°C | |
| Shaft Length | 52.8mm | |
| Contact Current | 10A | |
| Contact AC Voltage | 240V ac | |
| Contact DC Voltage | 24V dc | |
| Trigger Angle Range | 10 ° | |
| Maximum Operating Temperature | 65°C | |
| Length | 92mm | |
| Width | 31mm | |
| Standards/Approvals | No | |
| Mechanical Life | 1000000Cycles | |
| Alles selecteren | ||
|---|---|---|
Merk Siemens | ||
Product Type Safety Hinge Switch | ||
Series 3SE5 | ||
Contact Configuration 1 NO/1 NC | ||
Housing Material Plastic | ||
Number of Cable Entries 2 | ||
Terminal Type Screw | ||
IP Rating IP65 | ||
Cable Entry Size M20 x 1.5 | ||
Minimum Operating Temperature -25°C | ||
Shaft Length 52.8mm | ||
Contact Current 10A | ||
Contact AC Voltage 240V ac | ||
Contact DC Voltage 24V dc | ||
Trigger Angle Range 10 ° | ||
Maximum Operating Temperature 65°C | ||
Length 92mm | ||
Width 31mm | ||
Standards/Approvals No | ||
Mechanical Life 1000000Cycles | ||
- Land van herkomst:
- DE
3SE5 Hinge Switch
The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts.
For the mechanical monitoring of protective doors or flaps
Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061
Snap on contacts
Simple, fast wiring offers approx 20 to 25% reduction in connection time
Cable entry M20 x 1.5
Actuator head can be rotated in 22.5° increments
Hinge Switch
Note
Actuators are supplied, accessories are for spares.
Gerelateerde Links
- Siemens 3SE5 Safety Hinge Switch 1 NO/1 NC
- Siemens 3SE5 Safety Hinge Switch 1 NO/2 NC
- Siemens 3SE5 Safety Hinge Switch
- Siemens 3SE5 Series Safety Enabling Switch, 5 Position, 1 NO/1 NC, IP65
- Siemens 3SE5 Series Safety Enabling Switch, 5 Position, 1 NO/2 NC, IP65
- Schmersal TESK Safety Hinge Switch 1 NO/2 NC
- Banner SI Safety Hinge Switch 1 NO/2 NC
- Schmersal TC 236 Safety Hinge Switch 1 NO/1 NC