Wiha T Metric Hex Key, Hex size 3 mm
- RS-stocknr.:
- 707-3294
- Artikelnummer Distrelec:
- 180-41-253
- Fabrikantnummer:
- 00908
- Fabrikant:
- Wiha
Subtotaal (1 eenheid)*
€ 5,11
(excl. BTW)
€ 6,18
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 75,00
Op voorraad
- 314 stuk(s) klaar voor verzending
- 67 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 5,11 |
*prijsindicatie
- RS-stocknr.:
- 707-3294
- Artikelnummer Distrelec:
- 180-41-253
- Fabrikantnummer:
- 00908
- Fabrikant:
- Wiha
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Wiha | |
| Unit of Measure | Metric | |
| Product Type | Hex Key | |
| Shape | T | |
| Hex Size | 3 mm | |
| Short or Long Arm | Long | |
| Overall Length | 126mm | |
| Non-Sparking | No | |
| End Type | Hex | |
| Height Safe | No | |
| Finish | Nickel Chrome Plated | |
| Material | Chrome Vanadium Steel | |
| Standards/Approvals | VDE | |
| Overall Width | 80mm | |
| Alles selecteren | ||
|---|---|---|
Merk Wiha | ||
Unit of Measure Metric | ||
Product Type Hex Key | ||
Shape T | ||
Hex Size 3 mm | ||
Short or Long Arm Long | ||
Overall Length 126mm | ||
Non-Sparking No | ||
End Type Hex | ||
Height Safe No | ||
Finish Nickel Chrome Plated | ||
Material Chrome Vanadium Steel | ||
Standards/Approvals VDE | ||
Overall Width 80mm | ||
Vrijgesteld
- Land van herkomst:
- PL
Wiha Hex Key
Wiha hex and torx, T handle tool is designed for very high torque speeds and offers an easy, fantastic solution for loosening and tightening screws.
Features and Benefits
• Comprised of chrome vanadium steel, a hard waring material that ensures optimal strength and a long tool shelf life
• Through hardened and nickel plated
• High quality, Wiha classic T shaped hex driver
Did you know?
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.
Also, a hex key can be reconditioned using an electrical grinder, or similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.