Digilent 410-292 Nexys A7-100T Nexys 4 DDR Artix-7 Development Board ADC1410 for DAC121S101

Bekijk alle FPGA Development Tools
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 350,72

(excl. BTW)

€ 424,37

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 1 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 1€ 350,72
2 - 4€ 341,72
5 +€ 333,18

*prijsindicatie

RS-stocknr.:
134-6465
Artikelnummer Distrelec:
300-44-278
Fabrikantnummer:
410-292 Nexys A7-100T
Fabrikant:
Digilent
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Digilent

Programmable Logic Technology

FPGA

Product Type

Programmable Logic Development Kit

Kit Classification

Development Board

For Use With

DAC121S101

Featured Device

ADC1410

Kit Name

Nexys 4 DDR Artix-7

Standards/Approvals

RoHS

Nexys 4 DDR Artix-7 FPGA Trainer Board


The Nexys 4 is an FPGA development board designed for the educational market, featuring Xilinx Artix-7 architecture. The Nexys 4 DDR is compatible with the high-performance Vivado Design Suite as well as the ISE® toolset, which includes ChipScope™ and EDK. WebPACK editions of these toolsets can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition.

Xilinx Artix-7 FPGA (XC7A100T-1CSG324C) Features


• 101440 logic cells in 15850 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops);• 4860Kbit Fast Block RAM;• 6 x Clock Management Tiles, each with a phase-locked loop (PLL);• 240 x DSP slices;• Internal clock speeds exceeding 450MHz;• On-chip Analogue-to-Digital Converter (XADC)

Nexys 4 DDR Board Features


• MT47H64M16HR-25 128MiB DDR2 SDRAM

• S25FL128S 16MiB Quad-SPI Serial Flash memory

• ADXL362 SPI bus 3-axis accelerometer

• ADT7420 I²C bus temperature sensor

• ADMP421 MEMS microphone with PDM output

• Programmable over JTAG, Quad-SPI or USB

• FPGA Programming-Done LED

• 2 x 4-digit 7-segment LED displays

• 16 x User LEDs

• 2 x User RGB LEDs

• 5 x User Pushbuttons

• 16 x User Slide-Switches

• USB-UART Bridge via microUSB socket

• USB-A HID Host socket for mice, keyboards and memory sticks

• 12-bit VGA display output on DE15 connector

• RJ45 socket for 10/100 Ethernet connection

• 3.5mm jack socket for mono audio output

• microSD card slot

• 4 x Standard Pmod™ 2 x 6-pin connectors

• Analogue XADC Pmod™ 2 x 6-pin connector

• Powered from either USB, barrel jack socket or external battery pack

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Supplied with

Hardshell plastic case with protective foam, USB cable

Gerelateerde Links