Sensata / Cynergy3 RSF80 Series Horizontal Silicone, Nitrile Rubber (NBR), Viton Float Switch, 1 m Cable, NO/NC, 300 V

RS-stocknr.:: 725-9877
Fabrikantnummer:: RSF86H050T
Fabrikant:: Sensata / Cynergy3

Sensata / Cynergy3 RSF80 Series Horizontal Silicone, Nitrile Rubber (NBR), Viton Float Switch, 1 m Cable, NO/NC, 300 V

Subtotaal (1 eenheid)*

€ 32,30

(excl. BTW)

€ 39,08

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 75,00

Op voorraad

2 stuk(s) klaar voor verzending
Plus verzending 20 stuk(s) vanaf 16 februari 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 32,30

*prijsindicatie

RS-stocknr.:: 725-9877
Fabrikantnummer:: RSF86H050T
Fabrikant:: Sensata / Cynergy3

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Sensata / Cynergy3
	Product Type	Float Switch
	Mount Type	Horizontal
	Switch Output	NO/NC
	Housing Material	Polyphenylene Sulphide
	Cable Length	1m
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	120°C
	Maximum AC Voltage	300V
	Maximum DC Voltage	300V
	Maximum Current	600mA
	Gasket Material	Silicone, Nitrile Rubber (NBR), Viton
	Standards/Approvals	UL and NSF, WRAS
	Hazardous Area Certification	No
	Series	RSF80

	Alles selecteren
	Merk Sensata / Cynergy3
	Product Type Float Switch
	Mount Type Horizontal
	Switch Output NO/NC
	Housing Material Polyphenylene Sulphide
	Cable Length 1m
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 120°C
	Maximum AC Voltage 300V
	Maximum DC Voltage 300V
	Maximum Current 600mA
	Gasket Material Silicone, Nitrile Rubber (NBR), Viton
	Standards/Approvals UL and NSF, WRAS
	Hazardous Area Certification No
	Series RSF80

RSF80 Series External Float Switch Datasheet

Land van herkomst:: CN

This float switch is designed for mounting through the outside wall of a tank using a ½ inch NPT or ½ inch BSP threaded hole or boss

PPS material

½ inch NPT or ½ inch BSP external mounting

50cm ETFE flying leads

WRAS approved

Product Application Information

This PPS float switch is suitable for use in most organic and inorganic chemicals and most oils. Typical applications include diesel generators, hydraulic oil and gearbox oil levels.

Cynergy3 Horizontal Float Switches

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon

• Polypropylene

• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C

• N/O or N/C Switch output

• Switch action may be reversed by rotating the switch through 180º

• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile

• Flying Lead

• M12 plug connection

• Internal & external fitting inside a tank

• UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.