Infineon NOR 128 MB CFI, SPI Flash Memory 8-Pin WSON, S25FL128SAGNFV000

Bekijk alle Flash Memory
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 3 eenheden)*

€ 9,069

(excl. BTW)

€ 10,974

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 285 stuk(s) vanaf 09 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
3 - 27€ 3,023€ 9,07
30 - 72€ 2,757€ 8,27
75 - 147€ 2,687€ 8,06
150 - 297€ 2,677€ 8,03
300 +€ 2,407€ 7,22

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
181-8392
Fabrikantnummer:
S25FL128SAGNFV000
Fabrikant:
Infineon
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Infineon

Memory Size

128MB

Product Type

Flash Memory

Interface Type

CFI, SPI

Package Type

WSON

Pin Count

8

Organisation

16M x 8 Bit

Mount Type

Surface

Maximum Clock Frequency

133MHz

Cell Type

NOR

Minimum Supply Voltage

1.65V

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

105°C

Height

0.75mm

Length

6mm

Width

8 mm

Standards/Approvals

No

Series

S25FL128S

Number of Banks

2

Maximum Random Access Time

14.5ns

Number of Bits per Word

8

Number of Words

16M

Automotive Standard

AEC-Q100

This family of devices connect to a host system via a SPI. Traditional SPI single bit serial input and output (Single I/O or SIO) is

supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial commands. This multiple width interface

is called SPI Multi-I/O or MIO. In addition, the FL-S family adds support for DDR read commands for SIO, DIO, and QIO that transfer

address and read data on both edges of the clock.

The Eclipse architecture features a Page Programming Buffer that allows up to 128 words (256 bytes) or 256 words (512 bytes) to be

programmed in one operation, resulting in faster effective programming and erase than prior generation SPI program or erase

algorithms.

Executing code directly from flash memory is often called Execute-In-Place or XIP. By using FL-S devices at the higher clock rates

supported, with QIO or DDR-QIO commands, the instruction read transfer rate can match or exceed traditional parallel interface,

asynchronous, NOR flash memories while reducing signal count dramatically.

The S25FL128S and S25FL256S products offer high densities coupled with the flexibility and fast performance required by a variety

of embedded applications. They are ideal for code shadowing, XIP, and data storage.

Gerelateerde Links