Festo MS Filter Regulator, 40 μm, G3/8 in, Automatic, 12 bar, 8232902

RS-stocknr.:: 793-232
Fabrikantnummer:: MS6-LFR-3/8-D6-E-R-V
Fabrikant:: Festo

Festo MS Filter Regulator, 40 μm, G3/8 in, Automatic, 12 bar, 8232902

Subtotaal (1 eenheid)*

€ 111,70

(excl. BTW)

€ 135,16

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 23 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 111,70

*prijsindicatie

RS-stocknr.:: 793-232
Fabrikantnummer:: MS6-LFR-3/8-D6-E-R-V
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Product Type	Filter Regulator
	Port Size	G3/8 in
	Maximum Operating Pressure	12 bar
	Maximum Flow Rate	5700L/min
	Connection Thread Standard	G
	Series	MS
	Drain Type	Automatic
	Filtration Size	40μm
	Pressure Gauge Port Size	3/8 in
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ISO 8573-1:2010
	Pressure Setting Range	0.3 → 7 bar
	Pressure Gauge Port Thread Standard	G
	Model Number	8232902
	Bowl Material	Polycarbonate

	Alles selecteren
	Merk Festo
	Product Type Filter Regulator
	Port Size G3/8 in
	Maximum Operating Pressure 12 bar
	Maximum Flow Rate 5700L/min
	Connection Thread Standard G
	Series MS
	Drain Type Automatic
	Filtration Size 40μm
	Pressure Gauge Port Size 3/8 in
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ISO 8573-1:2010
	Pressure Setting Range 0.3 → 7 bar
	Pressure Gauge Port Thread Standard G
	Model Number 8232902
	Bowl Material Polycarbonate

Land van herkomst:: HU

Festo Series MS Filter Regulator, 0.30 to 7 bar Pressure Regulation Range, G3/8 Port Size - MS6-LFR-3/8-D6-E-R-V, Numeric Part Number: 8232902

This filter regulator conditions and stabilises compressed Air supply for industrial pneumatic systems. Designed for inline or front-panel installation with a vertical mounting tolerance of ±5°, it combines particulate separation with pressure control to maintain a defined output level. The unit accepts compressed Air and inert gases, operates across typical ambient and media temperatures, and presents pressure via an analogue gauge on a 3/8in port for Visual monitoring.

Features and Benefits:

• 40 μm filtration delivers particle removal while protecting downstream components
• Fully automatic condensate drain removes collected moisture without manual intervention
• 5700 L/min flow capacity supports high-throughput pneumatic circuits
• 12 bar maximum operating pressure allows use in robust compressed-air networks
• Polycarbonate bowl with plastic guard offers transparent inspection and impact protection

Applications

• Ideal for pneumatic tooling supplying high-flow valves
• Suitable for factory Air mains requiring moisture removal
• Used with inert-gas lines needing regulated downstream pressure
• Can be used for food-sector systems with supplementary materials check
• Appropriate for panel-mounted machine automation controls

What connection threads does the unit provide?

It uses G-standard threads with pneumatic ports sized G3/8 for both inlet and outlet and a 3/8in pressure gauge port.

What temperatures can the regulator tolerate in operation and storage?

The unit is rated for media, ambient and storage temperatures between -10 °C and 60 °C.

How effective is the condensate separation and what is the collection capacity?

The separator removes more than 75% of condensate and the bowl holds up to 38 ml of condensate.

Which materials are used for Seals and housing?

Seals are NBR, the membrane is NBR, the housing is die-cast aluminium and the bowl is Makrolon® polycarbonate.

What flow standard and Air purity classes apply to performance?

The nominal flow is standardised to DIN 1343 at 5700 L/min and the output Air meets ISO 8573-1:2010 [7:8:4] for purity.