Microchip, Controller IC, 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6 V SSOP

Bekijk alle Ethernet Interface Ics
Bulkkorting beschikbaar

Subtotaal (1 tube van 47 eenheden)*

€ 157,92

(excl. BTW)

€ 191,29

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Bestellingen onder € 75,00 (excl. BTW) € 5,95.
Tijdelijk niet op voorraad
  • Verzending vanaf 27 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per tube*
47 - 94€ 3,36€ 157,92
141 +€ 3,276€ 153,97

*prijsindicatie

RS-stocknr.:
912-2941
Fabrikantnummer:
ENC28J60-I/SS
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Product Type

Controller IC

Maximum Data Rate

10Mbps

Communication Mode

Full Duplex/Half Duplex

Loopback Mode

Internal

Standard Supported

IEEE 802.3

Interface Type

Serial-SPI

Mount Type

Surface

Package Type

SSOP

Pin Count

28

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

85°C

Maximum Operating Temperature

-40°C

Standards/Approvals

No

Width

5.6 mm

Minimum Supply Voltage

3.3V

Length

10.5mm

Height

2mm

Automotive Standard

No

Land van herkomst:
US

ECN28J60 10Base-T Ethernet Controllers


The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.

Features and Benefits:


  • 10BASE-T

  • Integrated MAC and PHY

  • 10Mbps bandwidth

  • IEEE 802.3 compatible

  • SPI interface with clock speeds up to 25Mhz

  • Supports MAC Unicast, Multicast and Broadcast packets

  • PHY loopback mode and programmable outputs

    • Applications:


  • Security

  • Instrumentation

  • Home control

  • Building automation

  • Industrial automation

  • VoIP

    • PHY and MAC?


    PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.

    MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.

    Daughter boards


  • AC164121 – 667-7899

  • AC164123 – 667-7902

    • Ethernet Communications - Microchip


    Gerelateerde Links

    Recently viewed