Microchip ENC28J60-I/SS, Controller IC, 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6 V SSOP

Bekijk alle Ethernet Interface Ics
Bulkkorting beschikbaar

Subtotaal (1 verpakking van 2 eenheden)*

€ 8,70

(excl. BTW)

€ 10,52

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Bestellingen onder € 75,00 (excl. BTW) € 5,95.
Op voorraad
  • 4 stuk(s) klaar voor verzending vanaf een andere locatie
  • Plus verzending 34 stuk(s) vanaf 25 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per verpakking*
2 - 8€ 4,35€ 8,70
10 - 22€ 4,23€ 8,46
24 - 98€ 4,12€ 8,24
100 +€ 4,015€ 8,03

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
770-7755
Artikelnummer Distrelec:
304-35-464
Fabrikantnummer:
ENC28J60-I/SS
Fabrikant:
Microchip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Microchip

Product Type

Controller IC

Maximum Data Rate

10Mbps

Communication Mode

Full Duplex/Half Duplex

Loopback Mode

Internal

Interface Type

Serial-SPI

Standard Supported

IEEE 802.3

Mount Type

Surface

Package Type

SSOP

Pin Count

28

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

85°C

Maximum Operating Temperature

-40°C

Height

2mm

Minimum Supply Voltage

3.3V

Standards/Approvals

No

Width

5.6 mm

Length

10.5mm

Automotive Standard

No

ECN28J60 10Base-T Ethernet Controllers


The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.

Features and Benefits:


  • 10BASE-T

  • Integrated MAC and PHY

  • 10Mbps bandwidth

  • IEEE 802.3 compatible

  • SPI interface with clock speeds up to 25Mhz

  • Supports MAC Unicast, Multicast and Broadcast packets

  • PHY loopback mode and programmable outputs

    • Applications:


  • Security

  • Instrumentation

  • Home control

  • Building automation

  • Industrial automation

  • VoIP

    • PHY and MAC?


    PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.

    MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.

    Daughter boards


  • AC164121 – 667-7899

  • AC164123 – 667-7902

    • Ethernet Communications - Microchip


    Gerelateerde Links