Electrolube Silver Conductive Lacquer for Electronics, PCBs

Can be used to create a thin, smooth, flexible and adherent film which has a high electrical conductivity. For use in repairing electrical circuits on PCB track or heated rear windscreens, screening plastic housings against high frequency fields, earthing strips, connections to non-solderable surfaces, contact surfaces, potentiometer tracks.

Excellent adhesion to a wide range of materials
Cures at room temperature, can be baked at 125°C if greater adhesion is required
Good electrical conductivity: 0.1 to 1.0 W/cm²
Use a clear lacquer after application to protect film

Replace cap when not in use

Flammable

The Electrolube 3g silver conductive adhesive paint can be used to create a thin, smooth, flexible and adherent film which has high electrical conductivity and that can be applied on a variety of substrates, including plastics, paper, wood, textiles, glass, ceramics and metals. It can be applied by brushing, spraying, dipping or a pencil and dries quickly at room temperature. The required electrical conductivity between 0.1 W/cm2 and 1.0 W/cm2.
Note:
Replace cap when not in use
Warning:
Flammable

• Excellent adhesion to a wide range of materials
• Cures at room temperature, can be baked at 125°C if greater adhesion is required
• Use a clear lacquer after application to protect film
• Operating temperature ranges between -80°C and 125°C

• Repairing electrical circuits on PCB track or heated rear windscreens
• Screening plastic housings against high frequency fields
• Earthing strips
• Connections to non-solderable surfaces
• Contact surfaces
• Potentiometer tracks