WAGO 788 Series Interface Relay, DIN Rail, 24V ac Coil, DPDT, 34mA
- RS-stocknr.:
- 180-3040
- Fabrikantnummer:
- 788-512
- Fabrikant:
- WAGO
Subtotaal (1 eenheid)*
€ 15,76
(excl. BTW)
€ 19,07
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- 58 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 15,76 |
*prijsindicatie
- RS-stocknr.:
- 180-3040
- Fabrikantnummer:
- 788-512
- Fabrikant:
- WAGO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | WAGO | |
| Coil Voltage | 24V ac | |
| Product Type | Interface Relay | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Series | 788 | |
| Terminal Type | Cage Clamp | |
| Switching Current | 8A | |
| Coil Current | 34mA | |
| Minimum Operating Temperature | -25°C | |
| Switching DC Voltage | 24V dc | |
| Switching AC Voltage | 250V ac | |
| Maximum Operating Temperature | 50°C | |
| Contact Material | Silver Alloy | |
| Width | 15mm | |
| Standards/Approvals | EN 61373 | |
| Height | 54mm | |
| Length | 15mm | |
| Alles selecteren | ||
|---|---|---|
Merk WAGO | ||
Coil Voltage 24V ac | ||
Product Type Interface Relay | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Series 788 | ||
Terminal Type Cage Clamp | ||
Switching Current 8A | ||
Coil Current 34mA | ||
Minimum Operating Temperature -25°C | ||
Switching DC Voltage 24V dc | ||
Switching AC Voltage 250V ac | ||
Maximum Operating Temperature 50°C | ||
Contact Material Silver Alloy | ||
Width 15mm | ||
Standards/Approvals EN 61373 | ||
Height 54mm | ||
Length 15mm | ||
Relay module, Nominal input voltage: 24 VAC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm
Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
Gerelateerde Links
- WAGO 788 Series Interface Relay, DIN Rail, 24V dc Coil, DPDT, 19mA
- WAGO 788 Series Interface Relay, DIN Rail, 12V dc Coil, DPDT, 36mA
- WAGO 788 Series Relay Module, DIN Rail, 24V ac Coil, SPDT, 34mA
- WAGO 788 Series Interface Relay, DIN Rail, 24V dc Coil, DPDT
- WAGO 788 Series Interface Relay, DIN Rail, 24V dc Coil, SPDT, 19.1mA
- WAGO 788 Series Relay Module, DIN Rail, 230V ac Coil, DPDT, 4mA
- WAGO 788 Series Safety Relay, DIN Rail, 24V dc Coil
- WAGO 788 Series Relay Module, DIN Rail, 115V ac Coil, DPDT, 8mA