WAGO 788 Series Interface Relay, DIN Rail, 24V dc Coil, DPDT
- RS-stocknr.:
- 180-3039
- Artikelnummer Distrelec:
- 304-10-815
- Fabrikantnummer:
- 788-390
- Fabrikant:
- WAGO
Subtotaal (1 eenheid)*
€ 23,21
(excl. BTW)
€ 28,08
(incl. BTW)
GRATIS bezorging voor bestellingen vanaf € 90,00
Op voorraad
- Plus verzending 53 stuk(s) vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 23,21 |
*prijsindicatie
- RS-stocknr.:
- 180-3039
- Artikelnummer Distrelec:
- 304-10-815
- Fabrikantnummer:
- 788-390
- Fabrikant:
- WAGO
Specificaties
Datasheets
Wetgeving en conformiteit
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | WAGO | |
| Product Type | Interface Relay | |
| Coil Voltage | 24V dc | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Series | 788 | |
| Terminal Type | Cage Clamp | |
| Switching Current | 8A | |
| Minimum Operating Temperature | -40°C | |
| Switching AC Voltage | 250V ac | |
| Switching DC Voltage | 24V dc | |
| Contact Material | Silver Alloy | |
| Maximum Operating Temperature | 70°C | |
| Width | 86mm | |
| Height | 73mm | |
| Length | 15mm | |
| Standards/Approvals | EN 61373 | |
| Alles selecteren | ||
|---|---|---|
Merk WAGO | ||
Product Type Interface Relay | ||
Coil Voltage 24V dc | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Series 788 | ||
Terminal Type Cage Clamp | ||
Switching Current 8A | ||
Minimum Operating Temperature -40°C | ||
Switching AC Voltage 250V ac | ||
Switching DC Voltage 24V dc | ||
Contact Material Silver Alloy | ||
Maximum Operating Temperature 70°C | ||
Width 86mm | ||
Height 73mm | ||
Length 15mm | ||
Standards/Approvals EN 61373 | ||
- Land van herkomst:
- DE
Relay module, Nominal input voltage: 24 VDC, 2 changeover contacts, Limiting continuous current: 8 A, Path, Red status indicator, Module width: 15 mm
Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
Gerelateerde Links
- WAGO 788 Series Interface Relay, DIN Rail, 12V dc Coil, DPDT, 36mA
- WAGO 788 Series Interface Relay, DIN Rail, 24V ac Coil, DPDT, 34mA
- WAGO 788 Series Interface Relay, DIN Rail, 24V dc Coil, DPDT, 19mA
- WAGO 788 Series Relay Module, DIN Rail, 230V ac Coil, DPDT, 4mA
- WAGO 788 Series Relay Module, DIN Rail, 115V ac Coil, DPDT, 8mA
- WAGO 788 Series Relay Module, DIN Rail, 110V dc Coil, DPDT, 6mA
- WAGO 788 Series Relay Module, DIN Rail, 48V dc Coil, DPDT, 11mA
- WAGO 788 Series Relay Module, DIN Rail, 230V ac Coil, DPDT, 5mA