Phoenix Contact RIF-1-RSC-LDP-24DC/2X21MS Series Interface Relay, DIN Rail Mount, 24V dc Coil, DPDT, 2-Pole

Bekijk deze categorie
Momenteel niet beschikbaar
Sorry, we weten niet wanneer dit weer voorradig zal zijn.
RS-stocknr.:
175-0526
Fabrikantnummer:
2905660
Fabrikant:
Phoenix Contact
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Phoenix Contact

Coil Voltage

24V dc

Contact Configuration

DPDT

Mounting Type

DIN Rail

Series

RIF-1-RSC-LDP-24DC/2X21MS

Number of Poles

2

Maximum Input Voltage

24V dc

Minimum Input Voltage

24V dc

Switching Voltage

250V ac/dc

Terminal Type

Screw

Depth

75mm

Height

89mm

Length

16mm

Contact Material

Silver Alloy

Input Current

18mA

Special Features

IP20 Relay Base, Safe Isolation

Maximum Operating Temperature

+60°C

Minimum Operating Temperature

-40°C

Life

5 x 10^6 (Mechanical) cycles

Standards Met

DIN EN 50178, UL 94

Relay Switching Classification

Pre-Assembled Relay Module

Dimensions

16 x 75 x 89mm

Operating Temperature Range

-40 → +60°C

Land van herkomst:
CN

Phoenix Contact RIF-1-RSC


This time relay RIF-1-RSC-LDP-24DC/2X21MS 2905660 from Phoenix Contact is the cost-effective alternative to a PLC

with easy configuration and fast wiring.

Features and Benefits


  • Pre-assembled relay module

  • Screw connection

  • Consists of: relay base, relay retaining bracket, and power contact relay with test button, integrated status LED, and freewheeling diode

  • Contact type: 2 changeover contacts

  • Time-saving potential distribution, thanks to plug-in bridges

  • Protection against operating errors due to manual operation that is lockable via screwdriver

  • Quick and error-free connection to the controller via system cabling

Safety


When working on the products and the system, you must always keep the operating instructions and other items of product documentation to hand and follow them strictly.

Demands on the power supply


Only use power supply units that ensure safe isolation between the primary and secondary circuits according to EN 50178.

Applications


You can use the same electromechanical relay module design for both AC and DC switching module.

  • Electrical isolation

  • Voltage adjustment of frequently varying voltage levels

  • Power amplification

  • Signal multiplication in the case of relay modules with multiple contacts (e.g., for signal confirmations)

Approvals


IECEx, ATEX and Class 1 Zone 2

Gerelateerde Links